wheres some good places to buy aftermarket clutches? thanks

I like to know too =D

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33730&item=2457508016

that is the centerforce. Supposedly a very good clutch.

All I have found are Centerforce, ClutchMaster, KORE sells SPEC clutches, and Kspec sell one called Valeo. I think I'm gonna jump on the centerforce on ebay.

ACT has got one if i am not mistaken...

I think I might have to jump on one of clutches off ebay. What do they normally run for?

I dont know if ACT ever released theirs. i was watching it in testing stage for about 6 months

I have a spec stage 3 and my Friend has a stage 1 both work well but the stage 3 is kinda hardcore barely streetable

yeah...the stage 3 with a 9lb flywheel is a real bear sometimes...

I sell the Valeo performance clutch set up. Comes with a light weight flywheel, new presure plate, disk.
$849.

I sell the Valeo performance clutch set up. Comes with a light weight flywheel, new presure plate, disk.
$849.

I personally would (and was going to) buy the Centerforce Clutch & Fidanza Flywheel. That setup is holding for TC, so that is all I need to hear.

Solo, I believe TC was going to sell the Centerforces for like $450 (with throwout bearing). I believe that is "desdog" selling them on Ebay (for a good price) but you will still need to get the TO bearing. According to Centerforces website they do make one for the Tib (p/n 134). ;)

Hrm if your looking for spec ones.. Lemme know and i'll work on getting some prices. I can more than probably get it at wholesale cost for anyone if ya'all gimme a week.

I think retail is 380 or 390 for a spec stage 3 but I got mine for 300 from my boys shop

Btw people, the throw out bearing is INCLUDED!!!

Looks like I might have to pick me up one!

ok well...i have 3 gs saved and if hyundai does sell that turbo for 1200...would the one tc is selling be good enough with the turbo...and if hyundai doesnt come out with the turbo...would it still be a good buy? thanks

I have a spec stage III and the Fidanza 9lbs, the set up works great!! :biggrin:
the flywheel is the touchiest mod yet!

i have spec stage 4 and alum flywheel and i hate it

it judders so bad. I think my motor is gonna fall out.

i ordered a stage 3 rom kore but they ****ed up and sent me a stage 4 i didnt wanna wait 6 weeks for the stage 4 to "arrive" and then another 6 weeks for the stage 3 to "get shipped". So i installed the stage 4.

I am going with the centerforce as soon as i get the cash.

ok well...i have 3 gs saved and if hyundai does sell that turbo for 1200...would the one tc is selling be good enough with the turbo...and if hyundai doesnt come out with the turbo...would it still be a good buy? thanks


Yeah, the centerforce clutch is supposed to hold up to 400 horse.

Yeah a stage 4 is way too much for the street

Btw people, the throw out bearing is INCLUDED!!!



If that is the case, jump on it! Nick should really update his listing to state that..

I have a spec stage III and the Fidanza 9lbs, the set up works great!! :biggrin:
the flywheel is the touchiest mod yet!


Hey man, does yours grab right at the top in like an inch. I have the same setup, and mine is a pain in the ass to drive . Goes like hell, but a pain to drive. We should hook up to do a comparison

Well I just bought one. ;)

would it be a good idea for me to get a stage 3 ? right now i only have a couple of bolt ons, but i plan on getting F/I and other upgrades later. Just wondering

Just get the clutchmasters, holds around 400 hp, highly streetable, plus you won't have to worry about dealing with spec clutches.

Hey man, does yours grab right at the top in like an inch. I have the same setup, and mine is a pain in the ass to drive . Goes like hell, but a pain to drive. We should hook up to do a comparison

ya it does grab pretty quick.... I find a little rough for everyday driving but it does go like hell!!
The setup is much easier to drive with now, the first couple weeks were rediculous untill I broke in the pressure plate springs.
I am up for a meet n e time. just let me know....

Hey Solo I talked to Centerforce and the tech said that you had to order the bearing and alignment tool separtely. Where did you order yours from?

Yeah I talked to centerforce and they said the bearing and the alignment tool was not included. On my new listing, I have that clearly stated. Solo, I think you also ordered one off the last auction. I will PM you pricing info for those items. Anyone else, I sell them at my site too at www.redemptionracing.com . I know my SPEC prices are good except the flywheels. I will edit the flywheels to match ptuning.com at $390. But remember my prices are shipped prices. Free shipping on everything inside the usa.

Did anyone figure out the spacing issue on the flywheel? Last I heard there were two different thinknesses on the flywheel and that the wrong one for your car wouldn't work.

According to ptuning.com up to build date 1/2003 uses part # - PT193361 which is 1 1/16" thick, after 1/2003 you need part # - PT193461 which is 1 3/8" thick. This on their website if you need more info email ptuning.com

What is the difference between spec clutches as compared to others such as centerforce or clutchmaster?

has anyone done a clutch swap on their own? I want to know how hard it is to do. Also if someone has done it then please post a DIY.

I have personally used the Centerforce DF on my car with ~400hp. Daily driven and raced on the weekends. Pedal feel is just like stock and it never slipped or got soft at the track.....

I have them with free shipping....

oh yeah the car was a DSM.