I won a bid on ebay for the OBX style exhaust, does any one have this exhaust and how much modification is needed to make it fit properly and how is the sound?

If your charcoal box needs modification, have the shop move the box to the trunk under the spare tire.
Even with the silencers in, the exhaust is very loud.

http://www.newtiburon.com/yabbse/index.php?board=16;action=display;threadid=34989

scroll down for pictures.

Is it to loud in the car resonating or only loud on the outside, or not worth it?

What price did you win it for?

i paid 500 shipped for the headers and exhaust

I have the full setup, OBX/SSAutochrome headers, straight-pipe cat, and exhaust. I haven't heard it side by side yet, but I don't think it is quite as loud as OZTuscani's car (OBX headers, MBRP exhaust, among many other things). I have the silencers in and fully closed. I'm sure if I pulled the silencers out it would compete.

It's a tad loud for my taste and I have a slight buzz-type sound around 3000-3500rpm, but it isn't completely obnoxious. I don't hear it over my stereo cruising on the highway. It sounds killer at full throttle at 4000rpm and up. The whole car comes alive.

i like mine
i paid 525 for it
also, relocate your charcoal box, it is MUCH easier than modifying your charcoal box housing.

as for loudness, not as loud as my old cutom magnaflow setup... and i had smaller tips that didn't even amplifiy it much on there... and this exhaust has some good sized tips...

I have the Key headers and a 2 1/2'' dynomax system with a magnaflow cat. I get the same buzz in the same RPM's but it isnt weedwacker..its more z28..

Whats up Everybody,
SS autochrome headers for the v6 tib I see them on ebay, does anybody know if they are any good, sound/performance?

Will they pair up well with my aem cai and borla catback?

Any insight would be much appreciated

thanks

i will let u know as soon as i recieve mine and install them i will have an exhaust clip for sure

This is a great exhaust for the money I paid 317 for the exhaust shipped. We tried to replace the char box to inside the spare tire well, but I had my amp under there so we just cut the box. The exhaust is low and loud with out the silencers. Here's some pics yo

http://www.imagestation.com/picture/sraid101/p58a207dfd7d248212ce9b7b968abda17/f9da01f1.jpg

http://www.imagestation.com/picture/sraid101/p5eff66f4d4b3a7076036f1899db1dc73/f9da01ed.jpg

Good luck with whatever you decide to do.

Hey guys i found the SSautochrome headers for my V6/6 on ebay and was wondering if yall had any info on them

you guys who want the info try the search. there is quite a few post already on this. also you can get ahold of ssautochrome and get the full set of headers and catback for 450 shipped.

Only one word to descibe the sound "Bad Ass" its deep and it a bit loud but then agin thats what most of you want isnt it a louder exhaust?

I had mine installed about a week ago, didnt have to mod the charcoal box as the car is a June 2002 model, fits perfect, and sounds real nice. Recomend to anyone who is looking for a cheaper exhaust.

Cheers

DoZZa

Hey guys i found the SSautochrome headers for my V6/6 on ebay and was wondering if yall had any info on them

Did you even read this very thread? My god... There is a picture right above your post and several descriptions and links!

thats two words. lol j/k exhaust is bad ass no doubt after 4000 its a killer specialy with aem cai. u can hear me mile away.going over 4000rpmhavent installed headers yet but i got part sitting at my house just dont have time for it and i heard its pain in the ass to instal headers. so ill wait til spring thats when all racers come out. heheheh:)

Stupid question, but how do you get the silencers out?!?

Stupid question, but how do you get the silencers out?!?AHAHAHAHAHAHAHAHA!! ROTFL

No serioustly!! you just have to take out one bolt!!

picture #2 :

i wish my tips were centered
they are bent outward, but the metal is so thin, that no shops want to fix it for me.

AHAHAHAHAHAHAHAHA!! ROTFL

No serioustly!! you just have to take out one bolt!!

I thought so.. but they seem to be in pretty tight.. I just didn't want to **** them up :D

OMG.. I just took out he silencers. SO LOUD... very ricey. I have headers as well so the sound is ungodly. Need to get a glasspack or hi-flow cat installed. It feels better with them out, but the sound outweighs the gains. Sound clip soon.

it's loud even with the silencers in...haha..
listening to music.....at 2500rpm....is...hahaha...