Yeah, I just want to be sure I have the basics down. My car isn't near by, it's in storage, so I can't just go outside try something, come back in and check online. I need to be fairly confident before I attempt it.
Step 1 - Two torq screws underneath
Step 2 - The airbag will left up, disconnect the blue and yellow connectors(Battery fully disconnected, not even in the car, due to other reasons)
Step 3 - Following the pictures - remove the screws from that center piece, and the big nut.
Step 4 - Removing steering wheel
Step 5 - This is where the guide has you putting the stock airbag into the aftermarket wheel. Obviously not an option with the Momo commando wheel. Picture 11 - I still have to remove the back piece, right?