__*** How to Do a DIY Clutch Job on a Tiburon's Pull-Type Clutch System ***__ - New Tiburon Forum : Hyundai Tiburon Forums
 
User Tag List

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
#1 Old 09-06-2010, 05:17 PM
Coegi vos via~
 
optimummind's Avatar
 
Join Date: Sep 2004
Location: Orange County, CA
Posts: 6,591
Mentioned: 21 Post(s)
Tagged: 2 Thread(s)
optimummind is on another leveloptimummind is on another leveloptimummind is on another leveloptimummind is on another leveloptimummind is on another leveloptimummind is on another leveloptimummind is on another leveloptimummind is on another leveloptimummind is on another leveloptimummind is on another leveloptimummind is on another level
(Thread Starter)
__*** How to Do a DIY Clutch Job on a Tiburon's Pull-Type Clutch System ***__

I see many, many threads pop up on how to go about doing a clutch job on our Tiburons with similar questions:

[1] What can I expect from a clutch install job?
[2] How does things look like in a clutch job?
[3] How do I remove the throw-out bearing (TOB)?
[4] How do I correctly install the TOB?

...and more.

Here are two videos that will help you visualize a clutch job on our Tiburons, which utilizes a pull-type clutch system.



For additional information relating to a clutch type on our jobs, refer to hmaservice.com. Make a free account and you have access to DIY instructions for almost everything on our cars.


To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

=멤버프로파일:
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

=Album:
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.



++++++++++
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
++++++++++
optimummind is offline  
Sponsored Links
Advertisement
 
#2 Old 09-06-2010, 05:27 PM
NewTiburon.com God
 
Tcarboy7's Avatar
 
Join Date: Jan 2010
Location: Kentucky/Ohio
Posts: 1,532
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Tcarboy7 will become famous soon enoughTcarboy7 will become famous soon enough
Re: __*** How to Do a Clutch Job on a Hyundai Pull-Type Clutch System ***__

yeah i noticed they were appearing like crazy too, must be the fact that winter is coming..UGH..winter...
Tcarboy7 is offline  
#3 Old 09-06-2010, 05:31 PM
NewTiburon.com Professional
 
White2scani's Avatar
 
Join Date: Feb 2010
Location: Orlando, fl
Posts: 760
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
White2scani
Re: __*** How to Do a Clutch Job on a Hyundai Pull-Type Clutch System ***__

Im personally having flywheel issues but that's another story
White2scani is offline  
#4 Old 09-06-2010, 06:05 PM
NewTiburon.com Professional
 
L-ski's Avatar
 
Join Date: Jan 2009
Location: back in the murda mitten
Posts: 683
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
L-ski will become famous soon enoughL-ski will become famous soon enough
Re: __*** How to Do a Clutch Job on a Hyundai Pull-Type Clutch System ***__

sweet vids, this will really help out!


To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

Stance in my pants
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

Raceland Coilovers~~~17x9 +24~~~ 205/40~~~25mm rear adapters~~~18 wheeler shift extension~~~Fart cans n stuff
L-ski is offline  
#5 Old 09-06-2010, 11:27 PM
Coegi vos via~
 
optimummind's Avatar
 
Join Date: Sep 2004
Location: Orange County, CA
Posts: 6,591
Mentioned: 21 Post(s)
Tagged: 2 Thread(s)
optimummind is on another leveloptimummind is on another leveloptimummind is on another leveloptimummind is on another leveloptimummind is on another leveloptimummind is on another leveloptimummind is on another leveloptimummind is on another leveloptimummind is on another leveloptimummind is on another leveloptimummind is on another level
(Thread Starter)
Re: __*** How to Do a Clutch Job on a Hyundai Pull-Type Clutch System ***__

For all you DIY clutch guys, be sure to watch the video and, even better, save these videos as "Favorites"~!!


To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

=멤버프로파일:
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

=Album:
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.



++++++++++
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
++++++++++
optimummind is offline  
#6 Old 09-26-2010, 04:14 PM
Retired Staff
 
Will51's Avatar
 
Join Date: Aug 2009
Location: Kingston, NY
Posts: 9,265
Mentioned: 50 Post(s)
Tagged: 0 Thread(s)
Will51 is on another levelWill51 is on another levelWill51 is on another levelWill51 is on another levelWill51 is on another levelWill51 is on another levelWill51 is on another levelWill51 is on another levelWill51 is on another levelWill51 is on another levelWill51 is on another level
Re: __*** How to Do a DIY Clutch Job on a Tiburon's Pull-Type Clutch System ***__

I hadn't ever done a pull style before, the 2nd vid was very helpful.

For quickest response regarding ZMR Mods please email me at
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Will51 is offline  
#7 Old 10-05-2010, 05:34 PM
iwb
NewTiburon.com God
 
iwb's Avatar
 
Join Date: Dec 2007
Location: Lower Mainland, BC
Posts: 2,440
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
iwb is a glorious beacon of lightiwb is a glorious beacon of lightiwb is a glorious beacon of lightiwb is a glorious beacon of lightiwb is a glorious beacon of light
Re: __*** How to Do a DIY Clutch Job on a Tiburon's Pull-Type Clutch System ***__

Yeah I stumbled on these when we were trying to figure out the issue with my clutch plates hub being raised to high/too large a diameter. Great watch & a good find!

. I . W a n t . B o o s t .

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

Former Stage 2 Sniped Tib - Forever a GK enthusiast
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
iwb is offline  
#8 Old 10-11-2010, 08:48 PM
NewTiburon.com God
 
Galagher's Avatar
 
Join Date: Aug 2006
Location: Red Deer Alberta Canada
Posts: 1,725
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Galagher will become famous soon enoughGalagher will become famous soon enough
Re: __*** How to Do a DIY Clutch Job on a Tiburon's Pull-Type Clutch System ***__

Can someone sticky this please. VERY useful information. I just pulled my engine and if it weren't for these videos i would have made another thread about engine pulls asking a bunch of questions.

2003 V6 Hyundai Tiburon turned Tuscani GT 5 Speed
Engine: .50 cold .83 hot turbo/ Mussa Dual Angle Tip Exhaust / AFC Neo Fuel Tuner / NGM Stg IV Upper+Lower Intake Manifolds / NGM 58mm Bored OE Throttle body / 290cc injectors/ BOOSTING 10psi, 6psi tial wastegate spring/ TWM Short Throw Shifter with Aluminum Bushings and Magnum Shift Knob / KJB Delrin Shift Linkage Bushing
Suspension: Konig Hurry 18"rims / Lexani N3000 215/35/R18/ Ark springs/KJB endlinks/ Ark rear sway bar
Galagher is offline  
#9 Old 10-11-2010, 10:30 PM
Coegi vos via~
 
optimummind's Avatar
 
Join Date: Sep 2004
Location: Orange County, CA
Posts: 6,591
Mentioned: 21 Post(s)
Tagged: 2 Thread(s)
optimummind is on another leveloptimummind is on another leveloptimummind is on another leveloptimummind is on another leveloptimummind is on another leveloptimummind is on another leveloptimummind is on another leveloptimummind is on another leveloptimummind is on another leveloptimummind is on another leveloptimummind is on another level
(Thread Starter)
Re: __*** How to Do a DIY Clutch Job on a Tiburon's Pull-Type Clutch System ***__

Quote:
Originally Posted by Galagher View Post
Can someone sticky this please. VERY useful information. I just pulled my engine and if it weren't for these videos i would have made another thread about engine pulls asking a bunch of questions.
lol, it was already Stickied~


To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

=멤버프로파일:
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

=Album:
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.



++++++++++
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
++++++++++
optimummind is offline  
#10 Old 10-11-2010, 10:41 PM
NewTiburon.com God
 
Galagher's Avatar
 
Join Date: Aug 2006
Location: Red Deer Alberta Canada
Posts: 1,725
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Galagher will become famous soon enoughGalagher will become famous soon enough
Re: __*** How to Do a DIY Clutch Job on a Tiburon's Pull-Type Clutch System ***__

lmao. you mean i searched to find a stickied thread. lulz

2003 V6 Hyundai Tiburon turned Tuscani GT 5 Speed
Engine: .50 cold .83 hot turbo/ Mussa Dual Angle Tip Exhaust / AFC Neo Fuel Tuner / NGM Stg IV Upper+Lower Intake Manifolds / NGM 58mm Bored OE Throttle body / 290cc injectors/ BOOSTING 10psi, 6psi tial wastegate spring/ TWM Short Throw Shifter with Aluminum Bushings and Magnum Shift Knob / KJB Delrin Shift Linkage Bushing
Suspension: Konig Hurry 18"rims / Lexani N3000 215/35/R18/ Ark springs/KJB endlinks/ Ark rear sway bar
Galagher is offline  
#11 Old 03-24-2011, 09:28 PM
NewTiburon.com Newbie
 
Join Date: Mar 2011
Location: tar heel, nc
Posts: 35
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
derrickm is an unknown quantity at this point
Re: __*** How to Do a DIY Clutch Job on a Tiburon's Pull-Type Clutch System ***__

Thanks for this post!!! Very imformative. Never performed a pull type clutch. Glad i seen this and not make the mistake of installing the throw out bearing on the pressure plate.
derrickm is offline  
#12 Old 06-06-2011, 05:24 PM
NewTiburon.com Newbie
 
Join Date: Jun 2011
Location: Juarez
Posts: 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
samswer is an unknown quantity at this point
Question Re: __*** How to Do a DIY Clutch Job on a Tiburon's Pull-Type Clutch System ***__

I can change my Dual mass flywheel from my tib to otherwith single plate?
thanks for your response..
samswer is offline  
#13 Old 07-05-2011, 05:01 PM
NewTiburon.com Newbie
 
Join Date: Jan 2011
Location: OC,FL
Posts: 15
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
xEliteDreameRx is an unknown quantity at this point
Re: __*** How to Do a DIY Clutch Job on a Tiburon's Pull-Type Clutch System ***__

Quote:
Originally Posted by optimummind View Post
I see many, many threads pop up on how to go about doing a clutch job on our Tiburons with similar questions:

[1] What can I expect from a clutch install job?
[2] How does things look like in a clutch job?
[3] How do I remove the throw-out bearing (TOB)?
[4] How do I correctly install the TOB?

...and more.

Here are two videos that will help you visualize a clutch job on our Tiburons, which utilizes a pull-type clutch system.

http://www.youtube.com/watch?v=Sf0g1BzkDjI

http://www.youtube.com/watch?v=YEhL87zf8rY

For additional information relating to a clutch type on our jobs, refer to hmaservice.com. Make a free account and you have access to DIY instructions for almost everything on our cars.
ha funny thing was I never knew what the lever was until now, damn could saved me a whole lot of trouble
xEliteDreameRx is offline  
#14 Old 07-06-2011, 07:36 AM
NewTiburon.com God
 
6behindblueeyez's Avatar
 
Join Date: Dec 2005
Location: Rhode Island
Posts: 2,438
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
6behindblueeyez will become famous soon enough6behindblueeyez will become famous soon enough
Re: __*** How to Do a DIY Clutch Job on a Tiburon's Pull-Type Clutch System ***__

Tips for beta owners:

Pull the engine and leave the transmission in the car to replace the clutch. Don't drop the transmission.

If your wiggling the engine and it won't separate, you forgot to release the tob. Take off the nut and arm on the fork. Make sure you don't pull the piston out of the slave cylinder too far. They don't have a stopper and once the piston falls out of the cylinder, it will never seal again. Then pull up on the fork.

Once you go rotary, you never go back.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

Last edited by 6behindblueeyez; 07-06-2011 at 07:42 AM.
6behindblueeyez is offline  
#15 Old 09-13-2011, 08:43 PM
NewTiburon.com Newbie
 
Join Date: Aug 2011
Location: Frankfort, KY
Posts: 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
jtbrumback is an unknown quantity at this point
Re: __*** How to Do a DIY Clutch Job on a Tiburon's Pull-Type Clutch System ***__

My clutch is slipping very badly, and i was wondering if anyone on here had the helms manual for the 2008 tiburon, and would not mind me downloading it from them. any help on this would be great, thanks in advance!
jtbrumback is offline  
#16 Old 12-28-2011, 05:00 AM
NewTiburon.com Newbie
 
Join Date: Oct 2011
Location: tx
Posts: 13
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
kenaku is an unknown quantity at this point
Re: __*** How to Do a DIY Clutch Job on a Tiburon's Pull-Type Clutch System ***__

is there a diy on the 03 clutch?
kenaku is offline  
#17 Old 12-28-2011, 05:06 AM
NewTiburon.com Post Master
 
Lessaj's Avatar
 
Join Date: Feb 2009
Location: Toronto, Ontario (Palgrave/Malton)
Posts: 6,929
Mentioned: 42 Post(s)
Tagged: 0 Thread(s)
Lessaj is a name known to allLessaj is a name known to allLessaj is a name known to allLessaj is a name known to allLessaj is a name known to allLessaj is a name known to all
Re: __*** How to Do a DIY Clutch Job on a Tiburon's Pull-Type Clutch System ***__

It's exactly the same.


To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

2012 Nov - COTM - Best Regional Tiburon (Canada)

2003 Hyundai Tiburon Rally Red Injen IS Cold Air Intake ;; Jun BL catback ;; DC headers ;; TWM STS ;; FL Headlights ;; 4300k HID Low//3000K HID Fogs ;; Shorty Antenna ;; 18x8 Tenzo DC-6 ;; Switchback Turn Signals ;; Lightweight Crank/Power Steering Pullies ;; Oil Catch Can ;; Seibon TS CF Hood ;; SMD Angel Eyes ;; HSD Coilovers
Canada OWNS NT
Lessaj is offline  
#18 Old 04-17-2012, 11:58 PM
NewTiburon.com Newbie
 
Join Date: Apr 2012
Location: Burlington, Wisconsin
Posts: 30
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
RHDawley is an unknown quantity at this point
Re: __*** How to Do a DIY Clutch Job on a Tiburon's Pull-Type Clutch System ***__

i never watched any videos but i was perfectly fine! hands on his the best way to learn tho, no way will i ever pay somebody to work on my car for me. ;P
RHDawley is offline  
#19 Old 05-15-2012, 03:46 PM
NewTiburon.com Novice
 
Join Date: May 2012
Location: Detroit, MI
Posts: 121
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
maegnas21 is an unknown quantity at this point
Re: __*** How to Do a DIY Clutch Job on a Tiburon's Pull-Type Clutch System ***__

Great video, helped me tremendously.
maegnas21 is offline  
#20 Old 07-24-2012, 08:22 PM
NewTiburon.com Newbie
 
Join Date: Mar 2012
Location: Buffalo,NY
Posts: 31
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
T8847R is an unknown quantity at this point
Re: __*** How to Do a DIY Clutch Job on a Tiburon's Pull-Type Clutch System ***__

i have white lithiem grease high temp and high pressure. could i use that on the imput shaft? or should i go buy wheel bearing grease?
T8847R is offline  
#21 Old 02-03-2013, 10:44 PM
NewTiburon.com Newbie
 
Join Date: Aug 2012
Location: oklahoma
Posts: 5
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
kino23 is an unknown quantity at this point
Re: __*** How to Do a DIY Clutch Job on a Tiburon's Pull-Type Clutch System ***__

thanks for the post, definatily helped a LOT changeing the clutch for the first time, 93,000 miles on the original clutch put some stress on it, drives like its new now =]
kino23 is offline  
#22 Old 05-04-2013, 11:03 AM
NewTiburon.com Newbie
 
Join Date: May 2013
Location: Orlando
Posts: 5
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
xOMcWigglesOx is an unknown quantity at this point
Re: __*** How to Do a DIY Clutch Job on a Tiburon's Pull-Type Clutch System ***__

Quote:
Originally Posted by jtbrumback View Post
My clutch is slipping very badly, and i was wondering if anyone on here had the helms manual for the 2008 tiburon, and would not mind me downloading it from them. any help on this would be great, thanks in advance!
2shared(dot)com/document/_-DB1D9C/Service_Manual_HYUNDAI_TIBURON(dot)html

This might help?
xOMcWigglesOx is offline  
#23 Old 06-23-2013, 12:35 AM
NewTiburon.com Newbie
 
Join Date: May 2013
Location: Kansas City
Posts: 31
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
X1TheCodexx1X is an unknown quantity at this point
Re: __*** How to Do a DIY Clutch Job on a Tiburon's Pull-Type Clutch System ***__

this helped my friend out alot! thanks
X1TheCodexx1X is offline  
#24 Old 08-30-2013, 12:32 AM
NewTiburon.com Newbie
 
Join Date: Sep 2012
Location: Torrance
Posts: 43
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Danewilbanks is an unknown quantity at this point
Re: __*** How to Do a DIY Clutch Job on a Tiburon's Pull-Type Clutch System ***__

Does anyone know where a transmission removal video is?
I'm doing a new clutch on my '04 Tiburon GT v6 NA and would like a complete step by step run down
Danewilbanks is offline  
#25 Old 11-09-2013, 03:10 AM
NewTiburon.com Novice
 
Join Date: Jun 2011
Location: Raleigh, NC
Posts: 139
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
rlawson55
Re: __*** How to Do a DIY Clutch Job on a Tiburon's Pull-Type Clutch System ***__

Download the Tib manuals on the site. There's a step by step of the change. It's what I used.
rlawson55 is offline  
Sponsored Links
Advertisement
 
Reply

Tags
clutch install, diy clutch, throw-out bearing, tob

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the New Tiburon Forum : Hyundai Tiburon Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools Search this Thread
Show Printable Version Show Printable Version
Email this Page Email this Page
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome