My Custom Bypass Valve - New Tiburon Forum : Hyundai Tiburon Forums
 
User Tag List

 
LinkBack Thread Tools Search this Thread Display Modes
#1 Old 04-22-2012, 10:44 AM
NewTiburon.com God
 
Tibutrauma's Avatar
 
Join Date: May 2011
Location: Wilmington, DE
Posts: 1,155
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Tibutrauma has a spectacular aura aboutTibutrauma has a spectacular aura aboutTibutrauma has a spectacular aura about
(Thread Starter)
My Custom Bypass Valve

I wanted to share In idea I had with everyone to see what they think. I had an idea to make a Bypass Valve from simple items from the hardware store for under $15. I designed one yesterday and made an valve operation gif. The valve will plug into a tee connector before the MAF sensor as opposed to an inline bypass valve sold on the market. Im also working out an idea to add a sensor so that when the valve opens even alittle, it will trigger an audible tone and illuminate an LED on the dash. I need some input. Ideas? Concerns? Tell me what you think...







Edit: I appologise if I came off as trying to make a "DIY: Bypass Valve" Thread. What I meant was I was designing a BP valve and I could make a NON-Operational concept from items bought at the hardware store, which I did. It's assembled and works in theory. I just needed to have a physical concept to see what could be done to improve the design.

Last edited by Tibutrauma; 04-26-2012 at 08:27 PM.
Tibutrauma is offline  
Sponsored Links
Advertisement
 
#2 Old 04-24-2012, 07:27 PM
NewTiburon.com God
 
Tibutrauma's Avatar
 
Join Date: May 2011
Location: Wilmington, DE
Posts: 1,155
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Tibutrauma has a spectacular aura aboutTibutrauma has a spectacular aura aboutTibutrauma has a spectacular aura about
(Thread Starter)
Re: My Custom Bypass Valve

Nobody wants to elaborate on this idea??
Tibutrauma is offline  
#3 Old 04-24-2012, 07:49 PM
NewTiburon.com God
 
mvpcougar07's Avatar
 
Join Date: Oct 2007
Location: Downtown Houston
Posts: 2,747
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
mvpcougar07 is a glorious beacon of lightmvpcougar07 is a glorious beacon of lightmvpcougar07 is a glorious beacon of lightmvpcougar07 is a glorious beacon of lightmvpcougar07 is a glorious beacon of lightmvpcougar07 is a glorious beacon of light
Re: My Custom Bypass Valve

What exactly are you trying to accomplish with this? If you are trying to make a fake BOV, it won't work. Your NA engine isn't making boost so there won't be anything to push your "valve" out. Remember, when an engine is naturally aspirated, it runs under vacuum.


To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
mvpcougar07 is offline  
#4 Old 04-24-2012, 10:09 PM
NewTiburon.com God
 
Spartacus's Avatar
 
Join Date: Jan 2011
Location: St.Louis, MO
Posts: 1,730
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Spartacus is a glorious beacon of lightSpartacus is a glorious beacon of lightSpartacus is a glorious beacon of lightSpartacus is a glorious beacon of lightSpartacus is a glorious beacon of light
Re: My Custom Bypass Valve

Quote:
Originally Posted by mvpcougar07 View Post
What exactly are you trying to accomplish with this? If you are trying to make a fake BOV, it won't work. Your NA engine isn't making boost so there won't be anything to push your "valve" out. Remember, when an engine is naturally aspirated, it runs under vacuum.
I think he's referring to a CAI bypass valve to prevent hydrolock.


To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
___________________________________________________________
2001 Impreza 2.5RS Aspen White - I/E, springs, WRX brakes, OZ Prodrive P1
2003 Tiburon GT Carbon Blue - RIP
Spartacus is offline  
#5 Old 04-24-2012, 10:30 PM
NewTiburon.com Professional
 
Bluerd2's Avatar
 
Join Date: May 2010
Location: Boca Raton, Florida
Posts: 571
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Bluerd2 will become famous soon enough
Garage
Re: My Custom Bypass Valve

My problem with bypass valves are, what is the point of having a cold are when air will be taken from the path with the least resistance, being the bypass valve. but that is just my view on bypass valves in general.

My suggestion would be build it with good materials, like some sort of spring maybe instead of a rubber band.
Bluerd2 is offline  
#6 Old 04-24-2012, 11:02 PM
NewTiburon.com God
 
mvpcougar07's Avatar
 
Join Date: Oct 2007
Location: Downtown Houston
Posts: 2,747
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
mvpcougar07 is a glorious beacon of lightmvpcougar07 is a glorious beacon of lightmvpcougar07 is a glorious beacon of lightmvpcougar07 is a glorious beacon of lightmvpcougar07 is a glorious beacon of lightmvpcougar07 is a glorious beacon of light
Re: My Custom Bypass Valve

Quote:
Originally Posted by Spartacus View Post
I think he's referring to a CAI bypass valve to prevent hydrolock.
Ah, I guess that makes sense. This part makes me think otherwise.

Quote:
Originally Posted by Tibutrauma View Post
Im also working out an idea to add a sensor so that when the valve opens even alittle, it will trigger an audible tone and illuminate an LED on the dash.
Guess I'll wait for the OP to clarify.


To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
mvpcougar07 is offline  
#7 Old 04-25-2012, 07:20 PM
NewTiburon.com God
 
Tibutrauma's Avatar
 
Join Date: May 2011
Location: Wilmington, DE
Posts: 1,155
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Tibutrauma has a spectacular aura aboutTibutrauma has a spectacular aura aboutTibutrauma has a spectacular aura about
(Thread Starter)
Re: My Custom Bypass Valve

The idea is for a bypass on a CAI system. The design is an initial idea (concept). A spring would be a better idea but you would have to know what the engine produces in terms of vacuum ( which I believe is measured in Hg) and what that translates to in spring tension. From my boost/Vac gauge, I know my intake produces about a 19-20 Hg vacuum. Obviously if the vacuum increases to say 25 or 30, something is wrong. The problem is that I know very little about the acual numbers when it comes to hydrolocking. I if I decide to get serious about this idea I will take a standard tibby intake and hook a shop vac to it and produce a "typical" vacuum with a filter and work out what acually happens during a hydrolock. Any ideas, advise, experiences would be helpful.
Tibutrauma is offline  
#8 Old 04-25-2012, 07:54 PM
Dedication to Thai Cuisine
 
breeechan's Avatar
 
Join Date: Jul 2006
Location: Colorado
Posts: 8,084
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
breeechan has much to be proud ofbreeechan has much to be proud ofbreeechan has much to be proud ofbreeechan has much to be proud ofbreeechan has much to be proud ofbreeechan has much to be proud ofbreeechan has much to be proud ofbreeechan has much to be proud ofbreeechan has much to be proud ofbreeechan has much to be proud ofbreeechan has much to be proud of
Re: My Custom Bypass Valve

the pressure in the intake piping will be essentially 1 atm. The pressure you want to determine is that in the pipe whilst the engine is trying to ingest water. You must find if this hydrolocking can occur from large amounts of water mingled with air, or by a column of water trying to move up the intake. In the latter case, you could say that the engine will soon deplete the air in the piping and cause a 0 vacuum condition which would draw the water up, as long as the intake piping is not 22 ft deep . To be safe, you could find the spring that will open under 0.7 or so atm, of course finding a suitable value may require some trial and error.

Lightest DD tib? 2593 lbs and falling

Quote:
I wish I had 5 Guys inside of me right now...
Quote:
That is pretty much how I felt the first time I had Five Guys...
breeechan is offline  
#9 Old 04-25-2012, 10:53 PM
NewTiburon.com God
 
Tibutrauma's Avatar
 
Join Date: May 2011
Location: Wilmington, DE
Posts: 1,155
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Tibutrauma has a spectacular aura aboutTibutrauma has a spectacular aura aboutTibutrauma has a spectacular aura about
(Thread Starter)
Re: My Custom Bypass Valve

Thats my concern. The question is, what amount of water in the cylinder constitutes the term "hydrolocking"? A droplet? A teaspoon? At what point, does any amount of water, start causing damage to the engine.

I thought of another idea just now. What if you had a moisture sensor downstream of the MAF that when too much water accumulates on the sensor, a circuit trips an emergency open valve to the bypass valve.
Tibutrauma is offline  
#10 Old 04-25-2012, 11:09 PM
Banned
 
Join Date: Mar 2009
Location: IN
Posts: 29
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Doomsday Postcard is an unknown quantity at this point
Re: My Custom Bypass Valve

Quote:
Originally Posted by Tibutrauma View Post
Thats my concern. The question is, what amount of water in the cylinder constitutes the term "hydrolocking"? A droplet? A teaspoon? At what point, does any amount of water, start causing damage to the engine.

I thought of another idea just now. What if you had a moisture sensor downstream of the MAF that when too much water accumulates on the sensor, a circuit trips an emergency open valve to the bypass valve.
Soda fountains @ fast food restaurants have those liquid sensors that stop the flow of soda...
Doomsday Postcard is offline  
#11 Old 04-26-2012, 02:52 AM
Swim away fishes...
 
Chuckie's Avatar
 
Join Date: Aug 2004
Location: Socal \X/
Posts: 6,106
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Chuckie is on another levelChuckie is on another levelChuckie is on another levelChuckie is on another levelChuckie is on another levelChuckie is on another levelChuckie is on another levelChuckie is on another levelChuckie is on another levelChuckie is on another levelChuckie is on another level
Re: My Custom Bypass Valve

Hydrolock is when the engine locks up because it tried to compress water. If it gets that far into the engine, one drop is enough. I question the preciseness of your rubberband. You should buy a bag of them just in case.

Oh, is the aem valve not sufficient. It's pretty damn cheap and already made. You won't have to buy sodas, coffee filters, or rubberbands....all things that don't belong in an engine bay unless you're reenacting a scene from MacGyver, the A-team, Survivorman, etc.


To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.


Chuckie
2009 Mazda 6 GT - Rotora, Ksport, TSW, Injen, AWR, Addco | 2012 Gen Coupe 2.0T - ARK, DEPO, HKS, PA, RMR, Sequence, Stillen, TurboXS
-> PSN = NT_c-man
Chuckie is offline  
#12 Old 04-26-2012, 04:22 AM
Retired NT Staff
 
Regina's Avatar
 
Join Date: Jul 2007
Location: Oklahoma City
Posts: 4,457
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Regina is on another levelRegina is on another levelRegina is on another levelRegina is on another levelRegina is on another levelRegina is on another levelRegina is on another levelRegina is on another levelRegina is on another levelRegina is on another levelRegina is on another level
Re: My Custom Bypass Valve

Quote:
Originally Posted by c-man View Post
Hydrolock is when the engine locks up because it tried to compress water. If it gets that far into the engine, one drop is enough. I question the preciseness of your rubberband. You should buy a bag of them just in case.

Oh, is the aem valve not sufficient. It's pretty damn cheap and already made. You won't have to buy sodas, coffee filters, or rubberbands....all things that don't belong in an engine bay unless you're reenacting a scene from MacGyver, the A-team, Survivorman, etc.
^^^ That bolded part. Why reinvent the wheel. One is already made.


Last edited by Regina; 04-26-2012 at 04:24 AM.
Regina is offline  
#13 Old 04-26-2012, 06:54 AM
Banned
 
Join Date: Mar 2009
Location: IN
Posts: 29
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Doomsday Postcard is an unknown quantity at this point
Re: My Custom Bypass Valve

Quote:
Originally Posted by c-man View Post
Hydrolock is when the engine locks up because it tried to compress water. If it gets that far into the engine, one drop is enough. I question the preciseness of your rubberband. You should buy a bag of them just in case.

Oh, is the aem valve not sufficient. It's pretty damn cheap and already made. You won't have to buy sodas, coffee filters, or rubberbands....all things that don't belong in an engine bay unless you're reenacting a scene from MacGyver, the A-team, Survivorman, etc.
I literally spit my coffee out when reading your last sentence mwahahaha kudos!
Doomsday Postcard is offline  
#14 Old 04-26-2012, 07:59 AM
NewTiburon.com God
 
jovanie's Avatar
 
Join Date: Jun 2004
Location: morovis, Puerto Rico
Posts: 4,705
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
jovanie is a glorious beacon of lightjovanie is a glorious beacon of lightjovanie is a glorious beacon of lightjovanie is a glorious beacon of lightjovanie is a glorious beacon of light
Re: My Custom Bypass Valve

I still dont get it

Quote:
Originally Posted by Valkare
the trifecta of tiburon groups:

NT
HHOP
Puerto Rico

and none of them seem to get along with each other
jovanie is offline  
#15 Old 04-26-2012, 08:04 AM
NewTiburon.com Professional
 
Tweaked Tay's Avatar
 
Join Date: Apr 2010
Location: Calgary, Alberta, Canada
Posts: 573
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Tweaked Tay has a spectacular aura aboutTweaked Tay has a spectacular aura about
Re: My Custom Bypass Valve

This is...in general...a BAD idea.

Good theory, and good try, but hit this too low quality to even hold together. Doesn't the pressure get quite high in a bypass valve?


To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.



Bye Bye Tib, Hello Renesis!

Tweaked Tay is offline  
#16 Old 04-26-2012, 08:21 PM
NewTiburon.com God
 
Tibutrauma's Avatar
 
Join Date: May 2011
Location: Wilmington, DE
Posts: 1,155
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Tibutrauma has a spectacular aura aboutTibutrauma has a spectacular aura aboutTibutrauma has a spectacular aura about
(Thread Starter)
Re: My Custom Bypass Valve

As I said before, the idea is concept. Obviously, the acual product is not going to have rubberbands but rather an extension spring. There will be safties in place in the event that the spring fails. Though it is unlikely, if it does fail, there will be a screen to catch the valve. It's not going to be made of paper coffe filters and rubberbands. Those are there to demonstrate the mechanisim in action. I'm working on a design of what the product may look like. When I'm done I'll post it.

Quote:
Originally Posted by Bluerd2 View Post
My problem with bypass valves are, what is the point of having a cold are when air will be taken from the path with the least resistance, being the bypass valve. but that is just my view on bypass valves in general.

My suggestion would be build it with good materials, like some sort of spring maybe instead of a rubber band.
That path of least resistance will be the filter. Breechan pointed out that...
Quote:
Originally Posted by breeechan View Post
the pressure in the intake piping will be essentially 1 atm. The pressure you want to determine is that in the pipe whilst the engine is trying to ingest water. You must find if this hydrolocking can occur from large amounts of water mingled with air, or by a column of water trying to move up the intake. In the latter case, you could say that the engine will soon deplete the air in the piping and cause a 0 vacuum condition which would draw the water up, as long as the intake piping is not 22 ft deep . To be safe, you could find the spring that will open under 0.7 or so atm, of course finding a suitable value may require some trial and error.
...which is invaluable advise. There is a spring out there with the right tension that will keep the valve closed until water starts coming in. Perhaps the tension will have to be calibrated for each persons engine. Meaning that, if say I get a maximum vac. of 21 inHg when coming down from a high RPM, water starts making its way up the intake and the vacuum hits 24 inHg, I want to make sure that the bypass valve opens at 22 inHg and the water wont reach the TB.

Quote:
Originally Posted by Tweaked Tay View Post
This is...in general...a BAD idea.

Good theory, and good try, but hit this too low quality to even hold together. Doesn't the pressure get quite high in a bypass valve?
Bypass valves are a bad idea or my design is a bad idea? What pressure? The BP valves are designed to open under vacuum....
Tibutrauma is offline  
#17 Old 04-26-2012, 10:05 PM
NewTiburon.com God
 
Tibutrauma's Avatar
 
Join Date: May 2011
Location: Wilmington, DE
Posts: 1,155
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Tibutrauma has a spectacular aura aboutTibutrauma has a spectacular aura aboutTibutrauma has a spectacular aura about
(Thread Starter)
Re: My Custom Bypass Valve

Here is an idea for a basic water sensor design...



The blue spots represent water vapor or mist into the engine. The senosr is placed inline with the air intake before the MAF sensor. The sensor is sandwiched between two non-conductive screens that will concentrate water mist into water droplets. Should one of these droplets contact and bridge a red and black wire, it will trip a circuit that first lights an in-dash indicator, then trips an action such as opening a bypass valve or a circuit that cuts ignition to all cylinders in an extreme situation.
Tibutrauma is offline  
#18 Old 04-26-2012, 10:16 PM
NewTiburon.com God
 
Tibanator's Avatar
 
Join Date: Mar 2011
Location: Dust city New Mexico
Posts: 1,452
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Tibanator has a spectacular aura aboutTibanator has a spectacular aura about
Re: My Custom Bypass Valve

just run a short ram intake or stay away from puddles, simple as that lol


To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

Albuquerque Tiburon club web page
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.


<ShakesBEER> ahaha "Tibanator" "I come from the future to change the past. I need to kill all Subaru!"
<Tibanator> my nick name came from my friend when my tib beat a wrx turbo, he said damn this is the terminator so ill call it the tibanator.
Tibanator is offline  
#19 Old 04-26-2012, 11:32 PM
NewTiburon.com Rookie
 
walkthetorque's Avatar
 
Join Date: Apr 2011
Location: India
Posts: 81
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
walkthetorque is an unknown quantity at this point
Re: My Custom Bypass Valve

The heat in the engine bay means the rubber band & cheap plastics won't last long.
walkthetorque is offline  
#20 Old 04-27-2012, 08:20 AM
NewTiburon.com Professional
 
Tweaked Tay's Avatar
 
Join Date: Apr 2010
Location: Calgary, Alberta, Canada
Posts: 573
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Tweaked Tay has a spectacular aura aboutTweaked Tay has a spectacular aura about
Re: My Custom Bypass Valve

Quote:
Originally Posted by Tibutrauma View Post
Bypass valves are a bad idea or my design is a bad idea? What pressure? The BP valves are designed to open under vacuum....
Bypass valve's are a fine idea, it's the negative pressure generated by the vaccume. Ever seen how easy it is to crush a pop can with suction?

And putting a rubber band anywhere neer heat is a bad idea. Not to mention they dry out and crack quite quickly.


To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.



Bye Bye Tib, Hello Renesis!


Last edited by Tweaked Tay; 04-27-2012 at 08:21 AM.
Tweaked Tay is offline  
#21 Old 04-27-2012, 08:36 AM
NewTiburon.com God
 
andbudzi's Avatar
 
Join Date: Sep 2005
Location: whitehall, MI
Posts: 3,002
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
andbudzi has a spectacular aura aboutandbudzi has a spectacular aura aboutandbudzi has a spectacular aura about
Re: My Custom Bypass Valve

cut your intake tube so that filter sits up high - right up against the hole where the pipe comes from engine bay (just like ebay cai does ) and no hudrolocking....unless you are in the 2 feet of water.

Or if you that paranoid - cut your intake pipe right before it makes a turn to go into the fender-well - intake will sit right behind the headlight.

03 GT 6spd. t3/t4+:
CAI, SSA H/E, Stg3 Lower & Upper IM, 60mm TB, Mafterburner, Cams, Stg.3 SB clutch, Spec Flywheel, spacer, Eibach rear sway bar, strut bar, motor mounts, Megan Racing springs, EBC brakes.
06 RX8 Shinka 6sd.
"A wise man once told me, racing a honda is like being in the special olympics... you may win but you're still a retard."

Last edited by andbudzi; 04-27-2012 at 08:38 AM.
andbudzi is offline  
#22 Old 04-27-2012, 05:33 PM
NewTiburon.com God
 
Tibutrauma's Avatar
 
Join Date: May 2011
Location: Wilmington, DE
Posts: 1,155
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Tibutrauma has a spectacular aura aboutTibutrauma has a spectacular aura aboutTibutrauma has a spectacular aura about
(Thread Starter)
Re: My Custom Bypass Valve

Quote:
Originally Posted by Tweaked Tay View Post
Bypass valve's are a fine idea, it's the negative pressure generated by the vaccume. Ever seen how easy it is to crush a pop can with suction?

And putting a rubber band anywhere neer heat is a bad idea. Not to mention they dry out and crack quite quickly.
Quote:
Originally Posted by walkthetorque View Post
The heat in the engine bay means the rubber band & cheap plastics won't last long.
For the third time.....the rubber band and soda can bottom is a CONCEPT. I'm not saying to put those in your engine. I made that as a visual so people can understand the design and its mechanics. Please go back and read the first post lol!
Tibutrauma is offline  
#23 Old 04-27-2012, 08:03 PM
NewTiburon.com God
 
Spartacus's Avatar
 
Join Date: Jan 2011
Location: St.Louis, MO
Posts: 1,730
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Spartacus is a glorious beacon of lightSpartacus is a glorious beacon of lightSpartacus is a glorious beacon of lightSpartacus is a glorious beacon of lightSpartacus is a glorious beacon of light
Re: My Custom Bypass Valve

Quote:
Originally Posted by Tibutrauma View Post
Here is an idea for a basic water sensor design...

The blue spots represent water vapor or mist into the engine. The senosr is placed inline with the air intake before the MAF sensor. The sensor is sandwiched between two non-conductive screens that will concentrate water mist into water droplets. Should one of these droplets contact and bridge a red and black wire, it will trip a circuit that first lights an in-dash indicator, then trips an action such as opening a bypass valve or a circuit that cuts ignition to all cylinders in an extreme situation.
I wouldn't be surprised if there were already inline air pipe water sensors that are proven to work. If you're going to try this, I at least wouldn't reinvent the wheel and just try to find a premanufactured sensor, or if you can't find one for sale, just copy an existing design.


To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
___________________________________________________________
2001 Impreza 2.5RS Aspen White - I/E, springs, WRX brakes, OZ Prodrive P1
2003 Tiburon GT Carbon Blue - RIP
Spartacus is offline  
#24 Old 04-27-2012, 09:20 PM
NewTiburon.com God
 
Tibutrauma's Avatar
 
Join Date: May 2011
Location: Wilmington, DE
Posts: 1,155
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Tibutrauma has a spectacular aura aboutTibutrauma has a spectacular aura aboutTibutrauma has a spectacular aura about
(Thread Starter)
Re: My Custom Bypass Valve

Quote:
Originally Posted by Spartacus View Post
I wouldn't be surprised if there were already inline air pipe water sensors that are proven to work. If you're going to try this, I at least wouldn't reinvent the wheel and just try to find a premanufactured sensor, or if you can't find one for sale, just copy an existing design.
I'm sure there is, I've not seen any for automotive applications though.
Tibutrauma is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the New Tiburon Forum : Hyundai Tiburon Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools Search this Thread
Show Printable Version Show Printable Version
Email this Page Email this Page
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome