++++ List of What Width & Offset Will Rub and What Won't ++++ - New Tiburon Forum : Hyundai Tiburon Forums
 
User Tag List

 8Likes
Reply
 
LinkBack Thread Tools Search this Thread Display Modes
post #1 of 1437 Old 03-01-2005, 11:13 AM Thread Starter
Former Staff
 
aLiEn_sPoReZ's Avatar
 
Join Date: Nov 2004
Location: Was: Hamilton, Ontario. Now: Houston, Texas
Posts: 3,336
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
aLiEn_sPoReZ is on another levelaLiEn_sPoReZ is on another levelaLiEn_sPoReZ is on another levelaLiEn_sPoReZ is on another levelaLiEn_sPoReZ is on another levelaLiEn_sPoReZ is on another levelaLiEn_sPoReZ is on another levelaLiEn_sPoReZ is on another levelaLiEn_sPoReZ is on another levelaLiEn_sPoReZ is on another levelaLiEn_sPoReZ is on another level
(Thread Starter)
++++ List of What Width & Offset Will Rub and What Won't ++++

If you are trying to figure out how a set or rims and tires will fit in your wheel wells, here are some simple examples to help you decide which rim width and offset will look best. I've printed this out and hung it by my computer and as I shop for rims on eBay I can quickly see if a set or rims will be too wide for my fender opening.

My calculations are for 18" rims only, because that's what I intend to put on my Tib, but the diameter shouldn't matter so these should be valid for all diameters. I highly recommend the following link found by Solo2Tib BEST RIM SIZE/OFFSET CALCULATOR to also help you decide.

STOCK RIMS: 17" x 7" Offset 46mm
STOCK TIRES: 215/45-17
STOCK DISTANCE FROM HUB TO WHEEL RIM LIP: 1.7"
STOCK DISTANCE FROM THE HUB TO FENDER LIP: 2.7"

The stock rim/tire setup leaves slightly less than a 1" gap between the rim lip and the inside of the fender lip. So, using some basic math, you will figure out that the distance from the hub to the inside of the fender lip (drawing a perfectly vertical line) is about 2.7". Taking into account that the width of the tire wall is about 0.5".

The rims you choose have to have a "DISTANCE FROM HUB TO WHEEL RIM LIP" value of 2.2" or less. Anything more and you might get some rubbing during hard cornering (unless you have a widebody kit).

Rolling your fender lips (or cutting them off) will give you an additional 0.5" of clearance, meaning the distance from the hub to inside of the fender lip (drawing a perfectly vertical line) will be 2.7" or less.

18" x 7.5" Offset 45mm
215/40-18 (Suggested Tire size)
DISTANCE FROM HUB TO WHEEL RIM LIP: 1.95"

18" x 7.5" Offset 42mm (Most common size for Tibs)
215/40-18 (Suggested Tire size)
DISTANCE FROM HUB TO WHEEL RIM LIP: 2.05"

18" x 7.5" Offset 40mm
215/40-18 (Suggested Tire size)
DISTANCE FROM HUB TO WHEEL RIM LIP: 2.15"

18" x 7.5" Offset 30mm
215/40-18 (Suggested Tire size)
DISTANCE FROM HUB TO WHEEL RIM LIP: 2.35" Possible Rub

18" x 8" Offset 45mm
215/40-18 (Suggested Tire size)
DISTANCE FROM HUB TO WHEEL RIM LIP: 2.2"

18" x 8" Offset 40mm
215/40-18 (Suggested Tire size)
DISTANCE FROM HUB TO WHEEL RIM LIP: 2.4" Possible Rub

18" x 8" Offset 35mm
215/40-18 (Suggested Tire size)
DISTANCE FROM HUB TO WHEEL RIM LIP: 2.6" Rub, unless rolled fender

18" x 8.5" Offset 35mm
225/40-18 (Suggested Tire size)
DISTANCE FROM HUB TO WHEEL RIM LIP: 2.85" Rub, unless rolled fender

18" x 8.5" Offset 30mm
225/40-18 (Suggested Tire size)
DISTANCE FROM HUB TO WHEEL RIM LIP: 3.05" RUB

18" x 9" Offset 35mm
(Suggested Tire size)
DISTANCE FROM HUB TO WHEEL RIM LIP: 3.1" RUB

18" x 9" Offset 30mm
(Suggested Tire size)
DISTANCE FROM HUB TO WHEEL RIM LIP: 3.3" RUB

Hope this helps!

Also see Post #2 for the info created by STAW512

Quote:
Originally Posted by Zaion View Post
Charles2p's tib is so fast, his low light beams illuminate the back of his car.

Last edited by aLiEn_sPoReZ; 06-20-2007 at 08:23 PM. Reason: change
aLiEn_sPoReZ is offline  
Sponsored Links
Advertisement
 
post #2 of 1437 Old 04-23-2007, 01:49 PM
NewTiburon.com Unemployed
 
staw512's Avatar
 
Join Date: Dec 2004
Location: Back in Michigan :(
Posts: 11,412
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
staw512 is just really nicestaw512 is just really nicestaw512 is just really nicestaw512 is just really nice
The NEW "Does it fit" thread

Here is a bunch of information on the tiburons lug pattern, and what size rims, tires and drops will work.

The Tiburon's bolt pattern is 5-114.3
Stock Rims: 17" x 7" Offset 46mm
Stock Tires: 215/45-17
Stock distance from hub to whell rim lip: 1.7"
Stock distance from hub to fender lip: 2.7"

Wheel . . . Offset . . .Tire . . . Notes

Stock Height

17x7.0 +35 215/45/17 , 225/45/17 , 245/45/17(slight rub in F)
17x7.5 +38 225/45/17
17x7.5 +40 235/45/17 , 225/45/17
17x8.0 +42 245/40/17
17x9.0 +45 255/40/17(R only w/ 5mm spacer and rolled fender, still slight rub)
18x7.5 +38 225/40/18
18x7.5 +40 235/40/18
18x7.5 +45 225/40/18
18x8.0 +35 225/40/18
18x8.0 +46 225/40/18
18x8.5 +35 225/40/18
19x8.0 +40 245/35/19
19x10. +25 275/40/19(R only, w/ widebody and fender roll, slight rub)
19x9.0 +50 245/35/19(w/ widebody, slight rub F)

Pro-Kit (or equivilent)

18x8.0 +40 225/40/18 , 235/40/18(slight rub)
18x8.0 +45 245/35/18(rolled R fender, slight rub R)

Sportline (or equivilent)

17x7.0 +38 235/40/17
17x7.5 +40 225/45/17
18x8.0 +?? 235/40/18(bad rub and fitment)

Tein S-tech (or equivilent)

17x7.0 +45 225/45/17
18x7.5 +45 225/40/18
18x8.0 +35 225/40/18

Tein Coilovers (or equivilent)

18x8.0 +35 225/40/18(set hard or will rub slightly)

Espelier (or equivilent)

18x7.5 +30 235/40/18(slight rub F)

Tanabe DF210(or equivilent)

19x7.5 +45 235/35/19

B & G (or equivilent)

18x7.5 +40 225/45/18

Dropzone (or equivilent)

18x7.5 +40-45 225/40/18(slight rub, on bumps only)

Last edited by staw512; 04-23-2007 at 01:53 PM.
staw512 is offline  
post #3 of 1437 Old 04-23-2007, 01:52 PM
NewTiburon.com Post Master
 
Join Date: Jan 2004
Location: ..............
Posts: 9,504
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
MrPhotoman will become famous soon enoughMrPhotoman will become famous soon enough
Re: The NEW "Does it fit" thread

Just to make sure I am readling this correctly, for example:

17x7.0 +35 225/45/17 will fit with no rubbing. Correct? What about on a lowered car?

Mods: seafoam: +487whp, pulstar plugs: +914.3whp
MrPhotoman is offline  
 
post #4 of 1437 Old 04-23-2007, 01:55 PM
NewTiburon.com Unemployed
 
staw512's Avatar
 
Join Date: Dec 2004
Location: Back in Michigan :(
Posts: 11,412
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
staw512 is just really nicestaw512 is just really nicestaw512 is just really nicestaw512 is just really nice
Re: The NEW "Does it fit" thread

come on dude... i dont know, i just reposted the info because the orignal poster took it down
staw512 is offline  
post #5 of 1437 Old 04-23-2007, 02:09 PM
NewTiburon.com God
 
CarrRyanE's Avatar
 
Join Date: Aug 2005
Location: 90210
Posts: 3,837
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
CarrRyanE has a spectacular aura aboutCarrRyanE has a spectacular aura aboutCarrRyanE has a spectacular aura about
Re: The NEW "Does it fit" thread

Quote:
Originally Posted by MrPhotoman View Post
Just to make sure I am readling this correctly, for example:

17x7.0 +35 225/45/17 will fit with no rubbing. Correct? What about on a lowered car?

photo... I am not sure about the offset but I ran a 235(top of tire) / 45(sidewall) / Z(speed rating) R(means 1 spin direction) 17(diameter of rim) on the stock height and didnt have a problem...the 45 stands for 45% of "225" so... I think it = 101.25mm where mine was 105.75... you should have 4.5 millimeters is equal to 0.1771653555 inches... almost no difference

Last edited by CarrRyanE; 04-24-2007 at 08:37 AM.
CarrRyanE is offline  
post #6 of 1437 Old 04-23-2007, 02:33 PM
NewTiburon.com Post Master
 
Join Date: Jan 2004
Location: ..............
Posts: 9,504
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
MrPhotoman will become famous soon enoughMrPhotoman will become famous soon enough
Re: The NEW "Does it fit" thread

Quote:
Originally Posted by CarrRyanE View Post
photo... I am not sure about the offset but I ran a 235(top of tire) / 45(sidewall) / Z(speed rating) R(means 1 spin rotation) 17(diameter of rim) on the stock height and didnt have a problem...the 45 stands for 45% of "225" so... I think it = 101.25mm where mine was 105.75... you should have 4.5 millimeters is equal to 0.1771653555 inches... almost no difference
I was worried about the offset, I currently run 225's.

Thanks

Mods: seafoam: +487whp, pulstar plugs: +914.3whp
MrPhotoman is offline  
post #7 of 1437 Old 04-23-2007, 04:16 PM
NewTiburon.com Novice
 
Kvwantstib's Avatar
 
Join Date: Jan 2004
Location: Clifton, New Jersey
Posts: 238
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Kvwantstib can only hope to improve
Re: The NEW "Does it fit" thread

If Tein S tech can run with 18x8.0 +35 225/40/18
then the prokit should be able to do it as well right?

If you don't stand for something, then you will fall for anything.
Kvwantstib is offline  
post #8 of 1437 Old 04-23-2007, 08:30 PM
...Be Envied
 
ArchAngel916's Avatar
 
Join Date: Jan 2005
Location: Michigan
Posts: 2,196
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
ArchAngel916 is just really niceArchAngel916 is just really niceArchAngel916 is just really nice
Re: The NEW "Does it fit" thread

What we should also add is the approximate drop for each set of springs/coilovers. That might help in comparing.

I've got Espelirs and I'll be getting 18x8.5 +40 hopefully soon so I will update you guys on how they fit.


To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
<-----Check 'em out----->
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
<-----Check 'em out----->
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
ArchAngel916 is offline  
post #9 of 1437 Old 04-26-2007, 05:31 AM
NewTiburon.com Newbie
 
rileytk2's Avatar
 
Join Date: Dec 2006
Location: Ballwin, Missouri (STL)
Posts: 6
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
rileytk2 is an unknown quantity at this point
Re: The NEW "Does it fit" thread

Quote:
Originally Posted by staw512 View Post
Here is a bunch of information on the tiburons lug pattern, and what size rims, tires and drops will work.

The Tiburon's bolt pattern is 5-114.3
Stock Rims: 17" x 7" Offset 46mm
Stock Tires: 215/45-17
Stock distance from hub to whell rim lip: 1.7"
Stock distance from hub to fender lip: 2.7"

Wheel . . . Offset . . .Tire . . . Notes

Stock Height

17x7.0 +35 215/45/17 , 225/45/17 , 245/45/17(slight rub in F)
17x7.5 +38 225/45/17
17x7.5 +40 235/45/17 , 225/45/17
17x8.0 +42 245/40/17
17x9.0 +45 255/40/17(R only w/ 5mm spacer and rolled fender, still slight rub)
18x7.5 +38 225/40/18
18x7.5 +40 235/40/18
18x7.5 +45 225/40/18
18x8.0 +35 225/40/18
18x8.0 +46 225/40/18
18x8.5 +35 225/40/18
19x8.0 +40 245/35/19
19x10. +25 275/40/19(R only, w/ widebody and fender roll, slight rub)
19x9.0 +50 245/35/19(w/ widebody, slight rub F)

Pro-Kit (or equivilent)

18x8.0 +40 225/40/18 , 235/40/18(slight rub)
18x8.0 +45 245/35/18(rolled R fender, slight rub R)

Sportline (or equivilent)

17x7.0 +38 235/40/17
17x7.5 +40 225/45/17
18x8.0 +?? 235/40/18(bad rub and fitment)

Tein S-tech (or equivilent)

17x7.0 +45 225/45/17
18x7.5 +45 225/40/18
18x8.0 +35 225/40/18

Tein Coilovers (or equivilent)

18x8.0 +35 225/40/18(set hard or will rub slightly)

Espelier (or equivilent)

18x7.5 +30 235/40/18(slight rub F)

Tanabe DF210(or equivilent)

19x7.5 +45 235/35/19

B & G (or equivilent)

18x7.5 +40 225/45/18

Dropzone (or equivilent)

18x7.5 +40-45 225/40/18(slight rub, on bumps only)


I just bought IKON GT5 19x8.5 rims with 225/35/19's. My car is the stock hieght not droped.
Just wondering if anyone knows if I will rub at all or if I need to buy spacers for the hubs?
Thanks for the info.


To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

2004 Tuscani Elisa 2.7
6 Speed Stage 3 Clutch, DC Sports Headers, Fadinza Fly Wheel,
19in IKON GT5 rims, Freedom Design Strut Bars, B&M STS
Invader CF Hood, 2 1/2 in. Full Header Back Exhuast, KDM CAI Royal Purple Synthetic.
"Drive it like you stole it"
rileytk2 is offline  
post #10 of 1437 Old 04-26-2007, 07:32 AM
NewTiburon.com God
 
CarrRyanE's Avatar
 
Join Date: Aug 2005
Location: 90210
Posts: 3,837
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
CarrRyanE has a spectacular aura aboutCarrRyanE has a spectacular aura aboutCarrRyanE has a spectacular aura about
Re: The NEW "Does it fit" thread

whats your offset?
CarrRyanE is offline  
post #11 of 1437 Old 04-26-2007, 08:29 AM
NewTiburon.com Newbie
 
rileytk2's Avatar
 
Join Date: Dec 2006
Location: Ballwin, Missouri (STL)
Posts: 6
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
rileytk2 is an unknown quantity at this point
Re: The NEW "Does it fit" thread

Quote:
Originally Posted by CarrRyanE View Post
whats your offset?

19x8.5 5x114.3 +20/38 225/35R19

That is the specs for my rims, and the offset.


To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

2004 Tuscani Elisa 2.7
6 Speed Stage 3 Clutch, DC Sports Headers, Fadinza Fly Wheel,
19in IKON GT5 rims, Freedom Design Strut Bars, B&M STS
Invader CF Hood, 2 1/2 in. Full Header Back Exhuast, KDM CAI Royal Purple Synthetic.
"Drive it like you stole it"
rileytk2 is offline  
post #12 of 1437 Old 04-26-2007, 09:01 AM
NewTiburon.com Newbie
 
Join Date: Sep 2006
Location: new jersey
Posts: 5
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
muggy52616 is an unknown quantity at this point
Re: The NEW "Does it fit" thread

does anyone know if 235/55/17 with 17X8 inch rims will fit on a stock 03
muggy52616 is offline  
post #13 of 1437 Old 04-28-2007, 03:08 AM
NewTiburon.com Expert
 
AccordTypeR's Avatar
 
Join Date: Mar 2004
Location: Brentwood, TN
Posts: 450
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
AccordTypeR is an unknown quantity at this point
Re: The NEW "Does it fit" thread

Quote:
Originally Posted by muggy52616 View Post
does anyone know if 235/55/17 with 17X8 inch rims will fit on a stock 03
I think it'll rub b/c tall side wall

plus your speedo is gonna be wayyyy off

get like 235-45-17 or 235-40-17
AccordTypeR is offline  
post #14 of 1437 Old 04-29-2007, 12:24 AM
NewTiburon.com Newbie
 
Join Date: Dec 2006
Location: Richmond, Virginia
Posts: 34
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Athrok is an unknown quantity at this point
Re: The NEW "Does it fit" thread

So I was looking at a pair of 17x7, 46 offset rims with 215/40/17 tires.

I wanted to check to make sure the set would look good.

2004 Tidal Wave Blue Tiburon GT
AEM Cold Air Intake - Mafterburner - Shark Racing Front Strut Bar - Ebay Greddy Copy Exhaust - Ash tray hidden Whistler 3450 - Tuscani Lettering - Clear Cornered Headlights - 17" Sport Edition E1 Wheels - S2000 Antenna - Sub Mod - Painted Gas Cap
Athrok is offline  
post #15 of 1437 Old 04-29-2007, 01:59 PM
NewTiburon.com Post Master
 
Join Date: Jan 2004
Location: ..............
Posts: 9,504
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
MrPhotoman will become famous soon enoughMrPhotoman will become famous soon enough
Re: The NEW "Does it fit" thread

Confirmed that this works:

H&R springs
225/45/17 tires
17x7 wheels with +35 offset

No rubbing

Mods: seafoam: +487whp, pulstar plugs: +914.3whp
MrPhotoman is offline  
post #16 of 1437 Old 04-29-2007, 02:11 PM
NewTiburon.com Expert
 
AccordTypeR's Avatar
 
Join Date: Mar 2004
Location: Brentwood, TN
Posts: 450
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
AccordTypeR is an unknown quantity at this point
Re: The NEW "Does it fit" thread

Quote:
Originally Posted by Athrok View Post
So I was looking at a pair of 17x7, 46 offset rims with 215/40/17 tires.

I wanted to check to make sure the set would look good.
that wheel is same size as stock wheel

if you go with shorter sidewall your speedo will be off.....and you'll have bigger gap in between tire and fender
AccordTypeR is offline  
post #17 of 1437 Old 05-09-2007, 12:41 AM
NewTiburon.com God
 
Join Date: Feb 2006
Location: Southern California
Posts: 1,144
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Kalian is an unknown quantity at this point
Re: The NEW "Does it fit" thread

Would 17x8 +53 offset fit our cars?

Bye Bye Sig
Bye bye Tib
Kalian is offline  
post #18 of 1437 Old 05-09-2007, 10:15 AM
NewTiburon.com Professional
 
GTV6TIB's Avatar
 
Join Date: Feb 2004
Location: Orlando
Posts: 515
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
GTV6TIB is an unknown quantity at this point
Re: The NEW "Does it fit" thread

i had on recently 225/45/18 slightly stretched on a 18x8 with +35 offset.. prokit drop... slight rub...... 225/40/18 probably wouldnt rub at all or very little if any....

mods: tired of listing them........
Super Silver GTV6 - delivered June 29, 2002; member since july 2002 = NOT A NEWB!!!
GTV6TIB is offline  
post #19 of 1437 Old 05-09-2007, 12:33 PM
NewTiburon.com God
 
Raven's Avatar
 
Join Date: Aug 2004
Location: Ukarine
Posts: 1,614
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Raven is an unknown quantity at this point
Re: The NEW "Does it fit" thread

on +46 17x7 wheels , 225/50/r17 fit with little to no rub. tested by me.

Sold Coupe'03,silver I4,ground wires kit,dual custom catback, Fidanza STS
Custom turboed - RB20 turbo, SMT7 piggyback, Innovate LC-1, MeganRacing BOV, VEI gauges, Coolingmist alky injection, Fidanza LWF, DXD clutch and really a lot more.
Sold Infiniti G37S '08
Rocking BMW 335i biturbo
Raven is offline  
post #20 of 1437 Old 05-09-2007, 04:23 PM
NewTiburon.com Novice
 
Kvwantstib's Avatar
 
Join Date: Jan 2004
Location: Clifton, New Jersey
Posts: 238
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Kvwantstib can only hope to improve
Re: The NEW "Does it fit" thread

18x8 +35 offset with 225/40/18 tires on stock suspension

fits perfectly, no rub at all.

fyi though, i think it also depends on the style design of the wheel. well that's what someone told me. i could be wrong.

If you don't stand for something, then you will fall for anything.
Kvwantstib is offline  
post #21 of 1437 Old 05-13-2007, 02:23 PM
NewTiburon.com God
 
Tuscanirider's Avatar
 
Join Date: May 2007
Location: Jordan
Posts: 4,882
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Tuscanirider has a spectacular aura aboutTuscanirider has a spectacular aura about
Re: The NEW "Does it fit" thread

245/40/17 with wheels 17x7.5 offset 35, all was fine on stock


To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.


But life goes on and we came to an end.
Tuscanirider is offline  
post #22 of 1437 Old 05-13-2007, 02:31 PM
NewTiburon.com Novice
 
Join Date: May 2006
Location: Atlanta
Posts: 241
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Bowser is an unknown quantity at this point
Re: The NEW "Does it fit" thread

it sounds like the only success with 245's are with 17" wheels, am I not mistaken?
Bowser is offline  
post #23 of 1437 Old 05-14-2007, 02:59 PM
NewTiburon.com God
 
Tuscanirider's Avatar
 
Join Date: May 2007
Location: Jordan
Posts: 4,882
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Tuscanirider has a spectacular aura aboutTuscanirider has a spectacular aura about
Re: The NEW "Does it fit" thread

Quote:
Originally Posted by muggy52616 View Post
does anyone know if 235/55/17 with 17X8 inch rims will fit on a stock 03
what's ur offset?
235/40/17 with wheels 17x8 offset 35 on stock hight rubbed at read, even slightly rolled fenders.
so i believe 235/45 or 55 shall rub for sure


To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.


But life goes on and we came to an end.
Tuscanirider is offline  
post #24 of 1437 Old 05-14-2007, 07:54 PM
NewTiburon.com Newbie
 
Join Date: May 2007
Location: Vail
Posts: 4
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Gallardo2501 is an unknown quantity at this point
Re: The NEW "Does it fit" thread

Does any one have any experience with a car with Tein springs and a wheel/tire combo 17x8+45 215/45-17?

Last edited by Gallardo2501; 05-14-2007 at 07:55 PM.
Gallardo2501 is offline  
post #25 of 1437 Old 05-16-2007, 09:33 PM
NewTiburon.com Novice
 
Join Date: Dec 2004
Location: Maryland
Posts: 171
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
dhluke is an unknown quantity at this point
Re: The NEW "Does it fit" thread

Will 18x8 +35 235/35-18 fit with stock? Thx!
dhluke is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the New Tiburon Forum : Hyundai Tiburon Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools Search this Thread
Show Printable Version Show Printable Version
Email this Page Email this Page
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome