Search Results for ‘bcm’

So the GKs with 2.7 liter engines and immobilizer have a problem where the ECU K-line comes in through pin 19 and out (and into the OBD2 port) through pin 20. Given that all that's in between them is the relay, couldn't I just crimp a bridge connector onto those two wires without cutting 19, or...

Good afternoon everyone! On my 2007 Tib, the LP fuse keeps coming loose. If I hold down the fuse to some degree, it will stay on. The fuse itself is fine, I have replaced it a couple of times. Just wondering if anyone else had has this happen, and if anyone knows a common fix before replacing...

Okay I have a 2006 Tiburon GT 2.7l V6 and I bought it with it having no spark at all, so I replaced the entire coil pack assembly, put an OEM Crank position sensor, new fuel pump, wires,plugs, everything, well, I got to looking and the Body Control Module (BCM) IS FRIED and that's why I'm not...

I’m looking for a matched set BCM and ECM from a US model 2003 V6 Automatic. I have a Canadian car with burned out BCM and the immobilizer will not allow the car to start. Hoping to try a matched set from a US car so that I can get it running again.

I seem to have hit a dead end. I have a Canadian 2003 Tiburon that I imported into the US and water got into the BCM killing the immobilizer. I tracked down a new replacement BCM after calling a Canadian dealer and getting the part number. The BCM needs to be programmed to be able to start the...

Hello, I need help with solve a problem caused from after market alarm system shortcut on my 2008 tiburon 2.0. The alarm was installed without any plastic case (just a board) and when I try to install Bluetooth microphone wire I touch the alarm system board. The result was shortcut and sound...

So I recently went the the repair shop because my dash lights, interior lights, brake lights, windows and turn signals stopped working and they stated that my junction box connector BCM-DE has melted along with the connector. They told me it was best to replace those since they got damaged, does...

I'm trying to go full diy on the power folding mirrors on my 2005 FL1, I checked the wiring according to the image below, I have already added the relays which work for sure, so everything checks out, except for whatever reason I'm not measuring 12 volts from BCM-EF 5. Because of this, pressing...

tl:dr I replaced my Fan Blower switch and now a lot of odd electrical related parts don't work. (Stereo, Locks, Clock). Car is an '03 Tib V6. So I heard about the fan blower knob melting and needing replaced after awhile (I'd link the thread + part # but I can't find it anymore) I removed all...

Hey guys, sorry if I'm posting in the wrong place. Driving a 2008 FL2 4 banger Whenever water drains down from the windshield, water leaks into the driver side footwell. (South Africa driver side is right hand drive). Where would be the best place to check for a hole in this drainage path...

Hello folks. Well, I'm brazilian and i've aquired a 03 Tibby (Hyundai Tiburon/ Coupe - FX/SE) at Brazil in 2012! My story with this car is kinda love-terror story. Tiburon in Brazil is a really rare car, the RD1 and 2 are more commom, probably there are around 100-150 running in the country...

I am having a major problems with electricity of my Hyundai Coupe 1.6L 2002. Car has been imported from Italy to here in Finland and problems started when weather was getting colder. Last winter there was no problems. Problems are continuing even now with +7 celsius. When I get to the car...

Does the BCM control anything with the AC? The ac will blow air but not cold so I'm thinking the compressor isn't getting power to it or the BCM is faulty because sometimes it does blow cold? What do you guys think??

Hoping that someone can help. I have a Canadian 2003 Tiburon I4, with a bad Body Control Module, intermittent signal issues and now a no start (flashing immobilizer). It is Canadian, so that means it does have a chipped key with an immobilizer. No remote though. If that was an option here? I am...

I recently bought a 2003 auto tib. I am having the following issues: No dash lights No tail lights/corner lights No AC lights or clock No license plate lights There is no radio in the car currently (bought without one) so i dont know if it affects the radio. The brake lights do still work...

My BCM (Body Control module) turn light broke down on me and I followed the tutorial on here, problem is, let some garage guy solder it but apparently he was a complete clutz. Tried sending it to a pro afterwards but they said it was beyond repair. I'll deal with the issue of that myself...

I have recently purchased a 1998 Hyundai Tiburon fx. I have been reading up on the turn signal problems of 2nd Gen, and thought I could resolve mine with some how to's. On my search I found in the driver corner of the floor a fuse panel with a switch....what does this switch do? Then I have no...

LOCAL SALE! PRICES IN CANADIAN DOLLARS. OPEN TO OFFERS, NEED THIS STUFF GONE! Hey guys, I still have a couple of parts off my 2003 Tiburon for sale, they have been taking too much space, so I will try to sell them again here: Full Sunroof (glass, inside cover, motor, wiring, everything...

Hello everyone, got a few problems that I can't seem to track down, was wondering if anyone might be able to give me some advice to help figure this stuff out, getting more and more frustrated by the day.. Orange Crush 2006 SEV6, 6 speed A friend and I recently connected a new battery...

I'm a Canadian with a USA import 03 GT Six Speed who is in desperate need of a good used BCM OEM Part # 95410-2C100. It is my understanding that Part # 95410-2C320 is also compatible. These part numbers do not compute with local Hyundai dealers here in Canada because my car is a US model. I...