Search Results for ‘cams’

Been thinking about getting grinded cams for my 2.0, Crower said it would cost about 290 dollars plus shipping, which to ship to here in Malta would bring the total to just over 300 euros. As far as I know if I put in different cams the ECU needs remapped and our ECU can't be remapped hence I'd...

Hey guys! Haven't been on the forum in a while since I sold my tib about a year ago. Just want to express the love I have for this forum. Met some great people and learned a lot about cars in general. While cleaning up my apartment I found some parts I never got to install on the tib so I'm...

EDIT: EVERYTHING REDUCED. Engine Stuff (all 2.7): Cams w/ journals, sprockets & timing chains: $90+shipping Upper Intake Manifold: $15+shipping Lower Inake Manifold + gaskets: $15+shipping (pending) Fuel Rails (2): $15+shipping OEM Fuel Injectors (6): $10+shipping OEM Coil Pack...

(Thread Edited) I'm currently planning for my NA build and I always tend to run into the odd question in addition to spending over a month trying to source parts. Luckily I have plenty of time to research these days to get a basic understanding. But there are always questions you fine people...

I bought this hyundai tiburon 2003 gt v6 last year and after 2 weeks of driving it the timing belt snapped and ruined the engine. after that i bought used engine and changed the water pump and timing belt on the new engine before installing it, i change my oil frequently, yesterday flushed all...

so heres my question, short and straight to the point. what kind of cam specs are people runnin with there turbo setups? also how neccessary are adjustable sprockets and gears? lastly how many of you are runnin stock cams and are u using adjustable sprockets/gears? is it unsafe to use stock...

i really want some cams. i may buy oem and send them in to get regrinded or if you have NGM , Colt, Crower, etc... just send me a pm or reply.

I was curious to see what can be down the a tibs cams as i heard they are quite mild and lose a lot of power compared to some more agresive cams. As i live in australia and dont know any companies that regrind. Can you buy completly new ones or is regrinding the only choice. Also what kind of...

finally got the money together to go with regrinded cams. looking for a set of stockers in good condition

http://youtu.be/MGZ0MoKUCBo After experimenting for a while, I finally finished regrinding my cams to race specs and installing them. Please let me know what you think!:3_lurk:

hey guys. so i finally got the money together to purchase stock cams and get them sent in and reground by crower then installed shortly after. i currently have I/H/E and plan on just adding the regrinded cams with .349 lift 210 duration and 110 seperation as well as the ngm N/A reflash and then...

This is an update on my last video post for my 03 Tiburon GT. Since the last post I. 1) Installed My Aftermarket Stereo. One 12" Cervin Vega Stroker 124, Shriuken Battery, Optima Yellow Top, 2 Gauge Wire, 195 Amp Alternator, AudioBahn HCT2300 Amp 2) Installed My Reground Cams, Custom...

Ok, i'd like to get some members opinions on this. This tib is in the garage till spring, which gives me time to tear into it. I plan on getting a 70mm BBTB, stage IV intake and crower cams; currently have SRI and borla exhaust. The problem: I live in an OBD2 emissions county in PA (even though...

I have just about a whole stock 2.7L motor. It is out of a 2006 Tiburon, and has just about 50,000 miles on it. It is missing the Upper Intake Manifold, the Pistons, and the Coil Pack, have pretty much everything else. It is just sitting there all put together, so I don't have pictures of...

Hey, I got parts that need to go since i am not going to be modding for a little bit. These are the part i got in hand this is my paypal "[email protected]". If you send as gift please include your address. If you do not feel sending as gift, that fine too but there is a fee 2.9% paypal...

hey guys, i have an 03' v6 tib with basic bolt ons. if im trying to stay all motor does anyone recommend high comp pistons or crower cams? if so what do they do? and is it worth it?

* * * PLEASE NOTE that I do NOT take credit for this information. I only stumbled across it while researching and thought it would be a good idea to put it here for easy-access knowledge, and to help those like me who know little about cams. Please notify me of any problems that need to be...

Looking to buy a; Stage 4 NGM Lower Intake Manifold (preferably red) Stock Cams (cheap) NGM 70mm TB (cheap) Let me know price, and shipping. Cash in hand. Thanks.

Well, college tuition and textbooks have taken a toll on me this semester. It's time I get rid of some parts that have been collecting dust in an effort to recoup some funds. All prices include shipping to the lower 48. I will ship ASAP when the payment clears through PayPal. I am pretty firm...

i got tired of searching because ive been searching for a week and just cant find a good enough answer. my car is n/a now but planning to put a supercharger on it before summer....what should i get my cams reground to? open to opinions. i want them to provide the most amount of power and work...