Search Results for ‘cel’

So I've had my tibby for over a year now and she was running like a beaut! I recently however noticed the CEL come on and when ran a check for any codes the P0016 came up with "Camshaft Position Bank 1 Sensor A". I did some reading but I can't seem for the life of me to find out where these...

Hello, I have a 2006 Hyundai Tiburon GS 2.0L, It is stock, no modifications at all. It has a check engine light on - p0133 Front o2 sensor slow response (B1S1) Work Done: Replaced front o2 sensor 3 times Exhaust Pipe Leak Fixed Replaced back o2 sensor (never had a problem with it but my...

Ok so a little background on the car. I bought the car used. The car is a 2003 Tib GT Tuscani trim. It has ABS. The ECM has been replaced with a salvage yard unit (numbers on it in Yellow paint pen) It is throwing a P0501 code that I have been unable to resolve. The speedometer works fine, there...

Whats up guys. Quick question and yes I tried looking this up. Thats how I found info on these. I have an 04 GT with DNAMotor Headers(dont ever buy, cheaped out, learned my lesson, yes CEL) and a Borla Cat-Back Exhaust System. Now, inspection is coming up...... CEL with spacers on secondary O2s...

Good afternoon, TL;DR- Cleaned engine bay. Got code above. Running, idling and accelerating rough, pulled and cleaned plugs, no dice. Help. Please. I recently did a full clean of my car including getting all of the junk out of the engine bay. Cleaned with some purple power degreaser...

My CEL comes on every once in a while on my 06 SE... When I check it its the small evap leak code(can't remember what number it is exactly) when it comes on I'll put High test in it for a week or so and it goes away. It's not a big issue just wondering if anyone has any Ideas.

I recently put a NGM Stage 1 on my 03 Tib. It was running great for about three weeks until my CEL went on that was reading Bank 2 O2 sensors running lean. I need help determining what can be the cause of this code. I have a boost gauge, so I know there aren't any vacuum leaks. My initial...

Hey everyone. So for a whole year I dealt with a CEL code due to a short ram Injen intake being put on my 04 Tib GT. I wanted to see if there was anyway the CEL could go away without throwing a Bank 1 and Bank 2 Oxygen Sensor code. I made sure the maf was the right way as well. Any suggestions...

Hey guys, so here's the deal. I have a cracked radiator (a new one is being shipped as we speak), so I was having to refill the water about 1-2 times a day. A few weeks ago, I was down the street from my house and the water ran out and my 2003 started to over heat. I rode it to my house and let...

Ok recently I got some codes read. Ever since I have had the car the P0102 code has been thrown, should be fixed with new MAF (which I have). The P0031 code is probably just some build up on the sensor and I think that is an easy fix as well. The last one is the only real worry. I recently...

So just recently i made a 400 mile round trip, half way through the trip i encountered that my CEL came on. I stopped at the closest Advance auto and it turned out that it was code P0145 and p0102 The guy there told me that there was nothing to worry about. So within days after i got back from...

Well i have a SRI and an Obx cat-back. I got it from a local tib driver who had a resonator and O2 bungs welded. I already have the po430 code and im still running on stock headers. I do plan on getting a set of after markets i just don't know which yet, search bar has been my friend. But im...

Guys I've got CEL problem. It shows P0302 - I know it's 'Cyl2 Misfire' - I am looking for solutions here: P0302, It also shows U2601 and C3121 errors. My engine is 2.0 Beta, 2003 European version. Any ideas what does it mean? I am trying to google it but without any results for now. :/

Just out of curiosity, Is there anyone else here with a Tib that is throwing a DTC code related to the O2 Sensors but doesn't have a CEL? I have had the same P0140 fault code for awhile now, hopefully to be fixed Monday/Tuesday, but my CEL isn't illuminated? Kinda been throwing me off because I...

I have a check engine light on and it reads code p0444 purge control curcuit open. I know thisnhas something to do with the purge control valve but what exactly is the problem? I replaced my purge control valve 4 months ago, my old one was bad and my car didnt want to start when i got gas. Since...

Can someone tell me how to fix this problem with the p0444 engine code. Something with purge control cucuit open. I replaced the purge control valve months ago. It went bad and my car would hardly start when i filled up. It ran fine for months and its still runs fine but this light has come on 3...

Ok, i'd like to get some members opinions on this. This tib is in the garage till spring, which gives me time to tear into it. I plan on getting a 70mm BBTB, stage IV intake and crower cams; currently have SRI and borla exhaust. The problem: I live in an OBD2 emissions county in PA (even though...

Can anyone tell me what engine code p0102 for a 2003 Tiburon GT means. The guy at the parts store said it means "low curcuit for MAF". My MAF is only 2 months old after getting a new one because i had this problem before. The car jerks and shakes at random times and random rpms. Sometimes its...

Ok now before you flame and say search, hear me out. I have a 4-2-1 header with one 02 sensor bung and no cats. (also I bought 2 new 02 sensors) I have tried just plugging in the front or just the rear. I tried a CEL eliminator which extends the rear 02 sensor out of the main exhaust pipe to...

P0442 Evaporative emission (EVAP) system – small leak detected Hose connection(s), intake leak, EVAP canister, EVAP canister purge valve I know what the code is but how do i fix it? after a couple weeks it came back after i erased it so i wanna fix it