Hyundai Tiburon Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-12 of 12 Results
  1. Transmissions
    I've been searching around for whether or not this is a good plan. I previously had a Clutchmasters stage 2 with the Fidanza flywheel, but with that going out finally I'm looking for a more affordable option for my aging 2.7 6-speed Tib. Since it's much cheaper and easier to just replace the...
  2. Transmissions
    If any one has ran into engagement issues when using flywheels from Fidanza flywheels and sprung Clutchmaster clutches, please feel free to contact me. I have that setup and have found how to fabricate a bracket to allow them to work together without damaging the design of the system. :)
  3. Transmissions
    I need to replace my clutch. When i did it the first time I installed the Fidanza 9lb flywheel (single mass) but used the stock clutch plate (Dual mass) and pressure plate and it resulted in a tapping sound in the tranny. can i get away with replacing the face ont he flywheel and finding a...
  4. Transmissions
    So my car has been in the shop for a month, warranty work for new synchros, and a new clutch and flywheel, and I finally got it back on Saturday. New Fidanza HY5 FW and (I think) a performance Lucas clutch (what I could afford, and it needed to be done soon). After getting the car, I was told...
  5. Transmissions
    The starter only grinds as soon as the car is running for about a second then stops.I was just wondering if you think this is a big deal. It's been doing this ever since I installed the Fidanza Lightweight Aluminum Flywheel.
  6. Transmissions
    Hey, I just installed an Exedy clutch and Fidanza flywheel and for some reason it's not shifting that smoothly. From 1st to 2nd it doesn't grind but it doesn't shift smoothly, 2nd to 3rd is fine, 3rd to 4th is fine, and 4th to 5th is the same as 1st to 2nd. I'm still in the "break-in" stage of...
  7. V6 - Naturally Aspirated
    So it's obvious what my problem is. I now have major clutch chatter that i can feel in the pedal. When I press the clutch in the noise and everything goes away. I called Fidanza and they said to use an aftermarket clutch. Anyone know what of good cheap aftermarket clutch to use on a 5 speed 2.7l...
  8. Transmissions
    im trying to install the new clutch on the flywheel and everytime i get 2 studs lined up the 3rd isn't. is there a trick to getting the new pressure plate to line up right? Fidanza flywheel spec stage 2+ clutch i have a 2.0 4 cyl Please help i have a 2.0 4 cyl
  9. Transmissions
    My clutch just went out in my 2003 v6 2.7L. After doing a bit of research I found this exedy stg 1 clutch & fidanza flywheel combo for only $475 http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=140270676120&ssPageName=STRK:MEWAX:IT#ht_2598wt_1167 From what I gather fidanza makes...
  10. Parts for Sale
    Dear NT members, I have a used Fidanza HY5 flywheel to sell. It has over 20000 miles on it. You may have to resurface the facing or buy a new one from Fidanza. Except that, it is in good condition, no teeth damage, no crack etc. This flywheel is for only V6 models. I want to sell...
  11. Parts for Sale
    PRICE DROPPED. Now $100. Dear NT members, I recently installed a new clutch set + flywheel, and have a used Fidanza HY5 flywheel sitting on my trunk. It has over 20000 miles on it, but it seems okay, except the facing (it got rust on it after pulled out). You may have to resurface...
  12. Transmissions
    Hi all, I have a 2005 Tiburon with the I4. I have recently purchased a Fidanza light weight aluminum flywheel and Southbend Stage 1 Rally clutch. Now I regret buying the clutch because it does not work and I know I will not get my money back. I broke in the clutch as recommended for 750 mi...
1-12 of 12 Results
Top