Hyundai Tiburon Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 51 Results
  1. Transmissions
    So the time is fast approaching to change my clutch, been slipping in 1st abit ever since I got the car a year ago and bite point is non existent feel. I want to bite the bullet and change to a lightweight flywheel aswell seeing as my flywheel is probably screwed also. I've been looking at kits...
  2. Transmissions
    My car needs a clutch soon and was wondering if I should bite the bullet and get a lighter flywheel too but considering the price it doesn't seem likely. I saw the F1 kit on Tuscani Customs which is a good price for a clutch kit and lighweight flywheel. The next one up is too costly. I've read...
  3. Transmissions
    So, the clutch on my tib was replaced right before i bought it at 37k miles. And I am having to replace it again at 87k miles. To me this seems like an issue. [Q1] Is there a known problem with OEM clutches on this car? I've read a in some places that there might be. I recently learned about...
  4. Transmissions
    I've been searching around for whether or not this is a good plan. I previously had a Clutchmasters stage 2 with the Fidanza flywheel, but with that going out finally I'm looking for a more affordable option for my aging 2.7 6-speed Tib. Since it's much cheaper and easier to just replace the...
  5. Tiburon General Discussion
    Hey ya'll...I'm back on the forums. It's been almost 3 years since I posted last. Recently had some back luck (and by recently I mean about 8 months ago) with the GK. Hydro-locked the motor going home from work one night. It ceased cylinder one's piston and broke the piston rod in half. The rod...
  6. Tiburon General Discussion
    Hey, Just got a stage 3 clutch masters Kevlar clutch and light weight flywheel. And the pedal is softer than the original OEM and it's been bled, plenty of fluid. Second gear doesn't engage at high RPMs but the rest will. Probably due to not being broke in, but I'm not sure. I've put 70 miles...
  7. Parts Wanted
    I need a good condition 6 speed v6 clutch and flywheel.mainly flywheel. LMK ASAP PLEASE.dont really have much time to check the forums so text me whenever 321-745-9781
  8. North East USA
    I have an engine block, unknown mileage and condition, a front valve cover, a lightweight aftermarket flywheel, and a tie rod. Check out some pictures here: Various Parts for 03 Hyundai Tiburon Prices negotiable on parts, PM me if interested
  9. Transmissions
    So, I found a really old thread with someone describing a similar issue (see here) but I can't find any real information. Anyway, I get this really bad grinding sound when in very specific situations. Any time the clutch is out, I'm going slow for the gear I'm in (like 15mph in 4th gear). I...
  10. Transmissions
    I have been having problems with my clutch slipping for a while. Nothing drastic, only when I had the need for speed. I got tired of it and took it into a Hyundai dealership to have it checked out. I found that I need to replace my clutch Assay. and my timing belt was also a recommended...
  11. Transmissions
    I have a 06 Tiburon SE. 6 speed manual tranny. 112,000 miles. Here's the problem, today driving home from work I stopped at a red light. When the light turned green and I shifted in to first. Almost immediately I felt a JERK when I accelerated. At a slow lunch jerking also. Also did a second...
  12. Tiburon General Discussion
    i have a 2003 tiburon se with 120,000km on it. the clutch was replaced about 2000km ago. right from the beginning the clutch engaged when the pedal was really far up. you can shift by only pressing the peddle in like 2" it seems like it is to high. is anyone else having this issue? i dont know...
  13. Transmissions
    OK guys, so i really wasn't planning on modding my tiburon until next year, but I've been reading around, and found out that the dual mass flywheel was going to need replacement, oh yeah i have a 2004 GT 2.7 5- speed, so long story short she finally gave out on me, bought the OEM clutch only to...
  14. Transmissions
    Hi guys, I'm looking for a Stage 1 Clutch & a Lightened Flywheel for a 2008 2litre ... I will be staying N/A & will probably be running around 170bhp once all the mods have been done, I know the stock clutch would probably handle 170bhp but I'd like a clutch that is a bit stronger so that I can...
  15. Transmissions
    I need to replace my clutch. When i did it the first time I installed the Fidanza 9lb flywheel (single mass) but used the stock clutch plate (Dual mass) and pressure plate and it resulted in a tapping sound in the tranny. can i get away with replacing the face ont he flywheel and finding a...
  16. Transmissions
    I just got back from the mechanic, did a free inspection and it turns out that the sound i thought was from the brakes (thought abs pump not working)is coming from the clutch. Please do not flame the thread instantly because i have been using search, reading threads here on clutches/flywheel...
  17. Parts Wanted
    well, after a few weeks of slipping bad, my clutch is making my tib dangerous to drive. Im hoping someone has an am clutch and maybe even a flywheel just laying around collecting dust! I really need it guys and I have no other means of transportation. I could pay shipping and a few bucks but im...
  18. Parts Wanted
    Well, after a month of slipping, my clutch is giving me too many problems for it to be safe to drive anymore! I'm not looking for a handout, but im hoping someone has an aftermarket clutch and flywheel or even just a clutch that theyre not using thats collecting dust. I can pay shipping plus a...
1-18 of 51 Results
Top