Hyundai Tiburon Forums banner
intake
1-20 of 52 Results
  1. I4 - Naturally Aspirated
    Wondering if anyone has a ported and polished intake manifold on their 2.0 I assume you'd need a big bore throttle body to get the most out of it which would still be not much I'd guess.
  2. New Member Introductions
    What does the stock motor look like? I’ve tried searching google and YouTube and Hyundai’s official site. I’m just wondering what kind of intake comes on it stock.
  3. I4 - Naturally Aspirated
    Hey, I recently bought an Injen SP1381P Cold Air Intake for my 2006 Hyundai Coupe 1.6l which fits nice. Only problem is the MAF it is supposed to be installed with. I don't have one. Tried to buy one from Ebay, but it was too small and didn't fit with the pipes. Does anyone know the dimensions...
  4. Tiburon General Discussion
    I was thinking about either an ebay or injen sri; however, I decided to DIY it after finding out I needed a new battery. First few weeks into owning the car, and my wallet is significantly lighter.
  5. V6 - Naturally Aspirated
    Im sorry I dont have the codes on me atm, but for about a year or more Ive been having a strange problem where my CEL would come on and when getting it checked it would be an air leak...so I have changed the MAF and have cleaned it and even changed the filter on the intake (injen)...sometimes...
  6. Tiburon General Discussion
    Hello, Been reading a little about this and the original mod was done on a 03 model. Can this still be done on an 04 model? If yes, do I have to remove the yellow circled bit? I used search function but ended up in the V6 category... mine is not a V6 Not really looking at those few extra bhp...
  7. V6 - Naturally Aspirated
    I installed an aftermarket intake on my '03 Tib 2.7 V6 and now the engine is stuttering while accelerating. It was fine when i first put it on. No CEL. Still no CEL, but it stutters under acceleration. And I was driving on the interstate with cruise control set at 80 (Speed limit is 80 in MT)...
  8. Parts Wanted
    Looking for a factory air intake assy (actually think the 4-cyl cars use the same airbox?). Need the airbox and bellows. I have the MAF. Need the stock airbox to get car thru CT emissions, as my INJEN intake keeps throwing check engine lights. Have tried cleaning MAF and clearing codes -...
  9. New Member Introductions
    Do CAI's work in Tiburons? Do they actually give any performance gain? I know it depends on the car. The car I specifically want to know about is the 2007 2.0. But if you have any insight/ stories of your CAI, please feel free to share it. Thanks!
  10. Tiburon General Discussion
    Hey everyone. So for a whole year I dealt with a CEL code due to a short ram Injen intake being put on my 04 Tib GT. I wanted to see if there was anyway the CEL could go away without throwing a Bank 1 and Bank 2 Oxygen Sensor code. I made sure the maf was the right way as well. Any suggestions...
  11. Tiburon General Discussion
    Hi NT! Looking to bring another product to market, but I need to know there's enough interest out there in the community. We've been working on Teflon polytetrafluoroethylene (PTFE) intake spacers for the 2.7L V6 Delta engine. These spacers increase the distance between the upper and lower...
  12. Parts Wanted
    Let me know how much shipped to NYC (or I can meet somewhere near). Would also be cool if you linked me to a nice replacement online that isn't too expensive.
  13. Parts Wanted
    Been having CEL problems on my 2004 Tiburon v6 after an aftermarket air intake was installed. I'm looking for a take-off factory air intake assembly for my v6. If anyone has an old factory intake that you don't use anymore after swapping theirs out I will happily take it off your hands. I will...
  14. Parts Wanted
    Looking for a stock intake for a 2003 GT. Whoever put the aftermarket one in there put it so it's sucking up water when it rains making it undriveable. Thanks!
  15. I4 - Naturally Aspirated
    Any help will be appreciated. I have looked all over the internet, as well as this forum, and have found very little about IMRC. (Intake Manifold Runner Control) I have heard the idea that some vehicles have secondary ports to the cylinders that will open when RPMs reach a certain value. I...
  16. Parts for Sale
    Hey people, I'm selling my custom powdercoated CAI. Haven't had it installed in my car for a few years and now I'm getting rid of the car so I guess theres no point in holding on to it. The CAI is a Fujita brand for v6 02-08 tibs. I had it powdercoated blue with black divots (the pictures...
  17. V6 - Naturally Aspirated
    Ok , So I have had problems with my TPS and throttle body before from the intake bringing dirt into it and I have fixed this with buying a new TPS and cleaning the throttle body once. Recently it went out again and i got a new tps, which helped with the "bogging" out when i would try to maintain...
  18. Product Reviews
    Vibrant Performance: Bellmouth Velocity Stack and Filter After doing some reading and research for a different project I’ve been working on and seeing the data in this article… Best Bell Special Investigation: Design of an intake bellmouth...
  19. V6 - Naturally Aspirated
    So friday after work I drove my car home ~10 miles and my car started acting funny after the first mile or so. The Intake and exhaust seemed to be louder and my car was acting like it was in limp mode and would not go over 5000 rpm. It was acting like there was a rev limiter put on it. No CEL...
  20. Parts for Sale
    I put the stock airbox back in my car, so I'm selling my Injen cold air intake. It's from my 2008 Tiburon GT. There is a place on it where something might have rubbed it or something on the side (you can see it in the pics). It didn't damage anything, just took off some of the black finish in...
1-20 of 52 Results
Top