Search Results for ‘muffler’

I’m fairly new to cars and was thinking about attempting to install cherry bomb glasspacks on my 07 tib gs. First off, I was thinking of taking off the stock muffler and was wondering if anyone knew if it would even fit. Also, what would be the best way to go about installing it, welding or...

I want to know if it’s possible to straight pipe BUT... over the straight pipe, make it look like the muffler & resonator are still there with a straight pipe straight through them with no working muffler or resonator, just preventing me from getting a ticket for an illegal straight pipe in my...

Hello, everyone, I'm a newbie at cars so I need some help. Every time I turn on the car it sounds loud and rumbles so I did some investigation. Turns out that there was a broken pipe disconnected from something. I didn't know what it was at first, but if I had to guess, it could be disconnected...

I'm on stock exhaust with a cat delete along with glasspack resonator from the previous owner and a 2.5 magnaflow muffler that I put on. Will the stock diameter cause spooling problems even with it being completely straight though?

Alright so i have a 2005 6 speed manual tiburon gt v6 and i was wanting to make it louder. Basically i was looking at getting a flow master muffler and putting that on there but i'm unsure on whether or not i need to buy 2 mufflers or if one will be sufficient. Anyone wanna help me out??

So I bought an Ebay exhaust expecting for the mufflers to end up rotting out at some point. I believe it is starting to happen so I need some advice. I would like to just throw some Super 44's in place of the rotting mufflers which are canister style mufflers. Some threads have stated that you...

Hi this is my first post so sorry if I'm being a huge noob. Anyway i want to straightpipe my v6 n/a tiburon (as in just cutting out the mufflers and putting straight pipes there) and i have been reading up on it but i found some conflicting information. For now, I don't care about power i just...

Straight through Stainless Steel Muffler Sold

So I've decided that I'm not going to put down 600-800 bucks for an exhaust system. I'm in welding school and we are learing to weld pipe and weld stainless so why not make it? I have a 2000 tib and the exhaust has all of like 4 bends or something all at the end after the rear wheels. So i'm...

A little side note to better understand the situation- I am a freshman at Michigan State University, and freshman are not allowed to have cars up at the campus for their first year. Aside from weekends, breaks or holidays the Tib is usually out of my possession and parked at home. BACK to the...

I have a question about muffler sizes that I didn't find a clear cut answer by searching. What exactly does the total diameter of the muffler do to the sound of it? i.e... would a 6 inch total diameter be louder/quieter than a 4 inch total diameter? What about length?

I got some extra money from my birthday (gotta love grand parents) and I'm looking to get a muffler and a resonator for my custom single exhaust setup. I'm probably going to go with 2.25" since it's single, and I have no future plans for F/I unless the lucky lottery numbers end up on the back of...

I'm going to have a custom 2.5" single exit exhaust. With probably the Hushpower II resonator, unless yall suggest something else. But I'm not set on which muffler to get. Any ideas??

Stupid question, but pretty much any new resonator will make my system louder right? And will a 4" round one fit fine in my custom system without touching under side of car or anything? I want loud, but want to keep resonator and muffler so it's not too loud as I drive this car everyday, so what...

04 GT V6 currently with stock dual tip exhaust. Could I go with a custom single exit if I get 2.5" tubing vs. the ARK single system that uses 3" tubing? Or is the single exhaust always more fitting for something other than N/A regardless of tube size? But if it's 2.5" shouldn't matter right...

I have an 04 GT V6 and wanting to just add mufflers for now. What length should my new muffler be and what inlet size?

WTB: 02-06 Tiburon Se 4 cyl 2.0L muffler's OEM I'm in need of the stock oem mufflers for a 2006 4cyl 2.0L Tiburon Se (both of them, As for the Yr i think there the same from 2002 till 2006 maybe even later. Im in the london area. Thanks!

Ok, so its come down to these two exhausts! Btw, don't hate on either because theirs not ARK, Borla, or those kind. I'm tight on budget and just looking for cheaper HP and I can alter sound later. OBX $310...

Ok, so heres the story. I have a 2005 Tiburon SE. After multiple searching on newtiburon.com forums (btw which is very helpful, thank you everyone!) I purchased a Flowmaster 44, dual mufflers, 2.5 inch inlets. I didn't realize how small the pipes were that ran to the exhaust. (Btw...my exhaust...