Hyundai Tiburon Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 25 Results
  1. I4 - Naturally Aspirated
    Was wondering how much of a difference underdrive pulleys make to a 2.0 Anybody ever use any? Also I don't think you can find them new anymore right?
  2. Tiburon General Discussion
    So when I returned home from an over 800km road trip without issues, I noticed my car was making the classic serpentine belt "chirp" or "whine" or whatever you want to call it, once again. Now I know this is a common issue with all cars overtime and should be an easy fix, but just hear me out...
  3. Tiburon General Discussion
    Hello all. First post here and I'm stumped at this point. I just replaced tensioner idler pulley and harmonic Balancer (thing was split and a massive pain to get off) I put everything back together and everything sounded and felt great. Drove around for a day and a squeak started to appear. It...
  4. Parts Wanted
    yes like many others I am looking for a UDP for my 06 2.7L. I would like an ARK set but I will be happy with just a under-drive pulley. I am interested in both a smaller UDP or the lightweight version. Any reasonable price will be accepted. PM me or reply. Thanks
  5. Hyundai Tech
    when i start car it squeels, every time i turn wheel it squeels, if i turn too far itll squeel. belt is only about 10k km old. as i turn wheel i notice top pulley will slow down compared to rest of pulley. also as im driving if i go over a puddle itll splash up and belt will squeel. also when...
  6. I4 - Naturally Aspirated
    Hi, I want to get the serpentine belts from Amazon. My mechanic said that the Tiburon uses 3 belts, and I wanted to make sure I was getting the right ones. I have a 2007 Tiburon GS I was thinking of getting the Brando brand since they have good reviews. Could you please post links to the...
  7. Tiburon General Discussion
    My car makes a screeching noise for about 10 seconds when i first turn on the car and when I'm making sharp turns either side. I opened the hood one day to diagnose the problem and i found that when i first start the car (cold start) the power steering pump belt, which is connected to the...
  8. V6 - Naturally Aspirated
    Hey there, I just wanted to share this experience with everyone, just in case it can help others diagnose what turned out to be a simple fix. I had my timing belt changed this past fall (approximately 8 months ago), and after that I started getting a random chirp on cold startup (not every...
  9. Parts for Sale
    Got a Sniper pulley for sale in great condition. Was previously on a blower but was taken off with great care. Asking $40 plus shipping. Willing to ship anywhere.
  10. V6 - Forced Induction
    Hello all. I am looking for this: (circled in red) The nut holding the pulley in place came off and somehow damaged the pulley and that above piece. The shaft has zero play, but I can rotate the pulley a good, couple degrees back and forth. The metal rectangular piece that holds the...
  11. Parts for Sale
    Hello, up for sale MAFterburner stage 1, with USB to serial adapter and CD. SOLD Also have 2.9 NGM pulley, a few dings from removal but straight and true. Will give about 0.5 less psi than a 2.8 pulley. $25 shipped Stock 03 black seats, I think shipping would be outrageous for the...
  12. Parts for Sale
    Fujita cold air intake with heat wrap on uper intake tube. there are no holes but the piping is scraped up a bit from use. the filter was just cleaned so you are all set to go. 80 shark racing thermal spacer 40
  13. Parts for Sale
    Unfortunately the time has come to sell my Alpine s/c manifold with cooling core. :3_sadley: I sanded off the "Alpine yada yada" lettering because I personally thought that the small paragraph was too much to be on the manifold. The core is in great shape and does not leak. Great for any stage...
  14. Tiburon General Discussion
    First Tibby, in dash and in tunnel revving. (Obviously drive by is sped up) But, is that even possible for it to rev that fast? I'd think all the golf coast oil spill lubrication, lightweight pulleys, flywheels, and high lift cams couldn't do it. Fake or ney?
  15. V6 - Forced Induction
    Figured out why the belt was chirping. Tensioner is good, no leaks on belt, it turns out silvertibbygt sent me an NGM 2.8 s/c pulley so after I did the swap onto my alpine supercharger, the pulleys were misaligned because the ngm pulley doesnt have the proper lip on it that the alpine...
  16. V6 - Forced Induction
    So as most of you know, i just bumped up to the 2.75" pulley. Before, I was running the 3.4" pulley. Once i got the new 2.75" pulley on, I bought a new belt that was 1/2" Smaller than what i was running with the 3.4". The car drove well for at least two weeks with no squeaking. Then all of a...
  17. Parts for Sale
    *Price Drop* As I've since gone FI, I no longer have need for this set of pulleys. SFR (speedfreakracing) made these many years ago as a set of one lightweight underdrive crank pulley, and one overdrive alternator pulley. Perfect for V6 N/A applications to gain some of that low end HP and...
  18. V6 - Forced Induction
    Hey guys, in the process of putting in my 290s and my new 2.8 pulley. will i be able to use the same belt i was using with my old 3.4" on my new 2.8 without major slippage? respond asap! puttin the s/c back on now. thanks dudes
1-18 of 25 Results
Top