Hyundai Tiburon Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-17 of 35 Results
  1. New Member Introductions
    the shifting is off it shifts at like 5000 rpm, i have a alpine stage 2 supercharge. mechanic said it was the supercharge, help :frown2:
  2. Parts Wanted
    I've been looking for a turbo setup for a while now for a 2003 gt 2.7 Manuel if you have anything along those lines let me know or a rippmod procharger. Other things I'm looking for is a high rise rally red spoiler Fl headlights with angle eyes Ngm upper and lower intake manifold Hana...
  3. V6 - Forced Induction
    I have a 2003 supercharged tiburon with cold air intake, 18 inch wheels, 6 speed manual transmission and a stage 1 mafterburner wired in my glovebox. over the past few years the car has had issues and ive been in school and unable to afford to fix the problems. I recently dumped the money into...
  4. V6 - Forced Induction
    I have a 2003 V6 gt tiburon and I have a guy that is trying to sell his supercharged v6 2005 tiburon. I offered him some money and a swap so he could sell his car NA and he is willing to do the trade but I have not made the deal final yet because I wanted to get a little more information to see...
  5. Tiburon General Discussion
    As the title suggests, I found a Supercharged 2.7 engine/tranny combo. It's equipped with an NGM Supercharger. . . . not sure of the specific model tho. Both engine and tranny have 43k miles on them. Figured I'd go ahead and let everyone know, for those who are nearby and interested in a new...
  6. New Member Introductions
    Just got this car and didnt know if it belonged to a site member, Anybody know anything about it? I got it in Maine where i live but the title says its a Georgia car. -2004 Hyundai Tiburon GT V6. Dark blue. -6 Speed standard with short throw shifter -94000 miles! -Stage 3 racing clutch -18"...
  7. Parts Wanted
    I need to find a stage 2 reflash...really can't afford to pay 650.00 from tc after buying other parts for stage 2
  8. Parts for Sale
    Get 4 FREE matching fuel injector connectors when you purchase the fuel injectors! I paid $140 for this setup! There is NOTHING wrong with these injectors. I am selling this setup because I bought bigger injectors. (4) 04 SRT4 540cc- Less then 20k miles on them! (4) NEW EV6 PnP Injector...
  9. I4 - Forced Induction
    So I have a 2005 i4 Tibby with no performance mods at the moment, although in the near future i would like to have be F/I. I dont really know the difference between a supercharger and a turbo set up, what are the costs, benefits, etc. of both?? Also, what kits would be the best bang for the...
  10. Parts for Sale
    Up for sale is my mafterburner stage 1 unit with all necessary wiring for a complete install. Walkthroughs for installs are all over NT so install should be a snap. Also im including a $40 gigaware Serial to USB port cable w/ installation CD which makes connection to your PC REALLY easy. The...
  11. V6 - Forced Induction
    So as most of you know, i just bumped up to the 2.75" pulley. Before, I was running the 3.4" pulley. Once i got the new 2.75" pulley on, I bought a new belt that was 1/2" Smaller than what i was running with the 3.4". The car drove well for at least two weeks with no squeaking. Then all of a...
  12. V6 - Forced Induction
    After upping the injectors to 290s, puttin on the 2.75" pulley, and doin a quick street tune, closed and open loop, i took the tib to the dyno today. Prior to this dyno, when i was running the 3.4" pulley, I ran 203 at the wheels So you know, supporting mods include: Alcohol Injection (I...
  13. V6 - Forced Induction
    currently running 5-7 lbs with 290ccs bigger fuel pump and tuned with mafterburner i have je low compression pistons and the rest of the stock block stage four clutch with fidanza flywheel. will i need anything else in order to run 8-9lbs by going to the 6.5" crank? or will i run perfectly...
  14. V6 - Forced Induction
    Just installed my new aeromotive fuel pressure regulator. My fuel pressure reading prior to the install at idle was around 50. Now after the install my fuel pressure jumps up to 100psi. Its not a gauge problem. the one i installed in the rail is brand new. Any thoughts as to why????
  15. Parts for Sale
    Great condition stock 190cc injectors for the v6 with only 800 miles on em. Orings are in perfect shape for install. $80 shipped Pics are lower down in the thread
  16. V6 - Forced Induction
    Have an 03 supercharged tib that im about to install 290cc injectors in. Problem is, I cant get my fuel pressure at idle below like 52psi. Even when i adjust my fpr all the way counterclockwise, the pressure wont drop lower than that 52. I can easily up the pressure with my fpr. And when i...
  17. Parts for Sale
    Have an almost brand new set of stock tib injectors for the v6. Only 500 miles on them. They are green and orings in great condition. $80 takes em shipped Sorry no pics. If your interested in buying and want some i can get you some
1-17 of 35 Results
Top