Search Results for ‘wheel’

Sold my Tiburon years ago but I always had a set of used wheels that I never put on but bought used originally. Was doing some cleaning and found the set. Figured I'd give this a shot! Price is negotiable for sure. The wheel in the picture is NOT one of my wheels but its what they look like...

Would this Wheel: 350MM 3" DEEP DISH WITH HOLES SUEDE Fit on this Hub?: SHORT HUBS: SRK-160H Also, do I need a quick release or can I just run with the wheel and hub? Please let me know, Would love the info, Thanks, Micah

So I’m looking at wheels that are 18x8.5 +35 on the front with a 225 40 18 tire but my concern is the back wheels are 18x9.5 +35 with a 265 35 18, is there any way those back wheels would fit?

Set of 4 wheels and tires. OEM wheels from an 08 Hyundai Tiburon. They are 17x7 with a 5x114.3 lug pattern and Khumo Ecstas AST 245/45R17 tires. The tires were demounted when I bought a set of aftermarket wheels in hopes that they would store well. The rubber doesn’t seem to be distressed or dry...

Hey All: I am hoping one of yall are able to help me out. Basically, my car gets unbelievably loud between 40 mph and 80 mph with a medium to high whiring noise that causes the car to reverberate. My wheel does not shake and the car is not all over the road it is just loud. I know it isn't...

Hey Everyone: So I bought a new 08 Tiburon and this one seems to have up and down play in the steering wheel. It seems that either the adjustment clamp isn't locking all the way, a loose bolt, or just something else needing tightened. Apparently that causes it to fail inspection and I don't...

Hi all, my 2003 Tiburon GT is gone and I have the stock 16" OEM wheels/tires sitting in my garage and I want to get rid of them. I don't remember how new/old they are, but they were barely used before I got an aftermarket sets on my Tib. I had to used 1 of the 4 when I got a flat last year but...

Hello! I was wondering about hubcentric rings and wheel spacers. Few months back, I installed new aftermarket wheels on my car. It didn't come with hubcentric rings so I ordered it from the site I bought the wheels from. When I went to get my wheels installed, they put the hubcentric rings only...

Hello, Everyone. My tiburon has been pulsating when I brake as of late, and was suspected to have a bent or warped rotor in the left-rear. Car was in an accident in March, and had left rear wheel hit pretty hard. No pulsation before that. Afterwards, replaced the knuckle, rotor, and control...

Hello! i am new to the forums. i read alot on here but havent posted until now, I have a 2001 tiburon and im really curious if a steering wheel + airbag will be able to fit from a model 2003+ onto mine? Will it fit and clear the back piece? and will it plug and play so that the airbag works. im...

Okay so after searching forever for a seller from the US for a good price, I found this Tuscani Emblem 2007 2008 Hyundai Tuscani Tiburon Hood Emblem Genuine US Seller 86320 2C700 | eBay I drive a 2008 Hyundai Tiburon GT LTD, Im guessing that will fill the hood, but I also want one for the back...

Hi, i've bought the MOMO STEERING WHEEL MOUNTING ADAPTER HUB KIT 4703 (http://www.ebay.com/itm/MOMO-STEERING-WHEEL-MOUNTING-ADAPTER-HUB-KIT-4703-/130628583990?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3ATiburon&hash=item1e6a120236&vxp=mtr) Now i have this problem: Do i have to remove...

Hey guys I drive my tib a little hard, and I admit I like to slide around corners, but it looks like the habit has finally caught up with me, whenever the car slides and I countersteer it throws the alignment COMPLETELY out of whack, ill turn a corner and my steering wheel goes from level to...

So I followed a wheel bearing DIY, had a new bearing pressed, and the new bearing failed the first day. This is the front passenger side, now with new cv, and tie rod end. I could use some suggestions on what to do, Will take it back to the shop that pressed it tomorrow. What might cause this...

I cant find a straight answer for this one, but I have an 03 tib with stock 16" rims (type A wheel). The rear wheels sit in quite far and I want to put some adapters in to push them out. I am not looking to get it flush with the fender or make it look really aggressive, I just don't like the how...

Well, my front driver side wheel bearing crapped out on me. I would like to replace it myself but know that a press is required to remove the old bearing and insert the new. I have found that hub assemblies are sold with bearings already pressed in. Has anyone gone this route before? Would...

Hey guys! I am selling my stock set of GS (16") wheels since I bought another set. I would like to do it locally but if anyone is interested in paying for shipping I am open. They are in perfect condition, no scratches (only a small thing). They actually come with tires (summer tires, good for...

I went to remove my wheel bearing ln my 2006 tiburon ft and when I pulled the hub off a set of bearings feel out.... I'm being told this is impossible because they are not made with outter bearings... Help?

(Sticky?) Allright, there have been a few questions lately about how to 'read' or interpret the way wheels (rims) and tires are sized. The normal way for these to be written follow as such Wheels (rims) : 17X9.5 5-114.3 15MGM Tires : 225/45zr/17 or 215/45/17 The...

I need a driver side CV axle for an 04 GT 6 speed. The tip on mine got completely screwed, and honestly I do not have the money to buy a brand new one from dealership since I just bouht a house :/ Please let me know if anybody has one and if so what do you want for it and shipping to 84601 if...