Hyundai Tiburon Forums banner

08 abs pump

345 Views 1 Reply 2 Participants Last post by  peachferrari
My wife recently bought a 2008 Tiburon SE V6 6 SPD. Abs with traction control.
The abs pump has a stripped fitting where a line connects coming from the master cylinder. She ordered a pump module assembly from eBay but the numbers don't match what the old one is and the wiring harness is different. Could I remove the abs module from the stripped pump and put it on the newer pump with the different module?
1 - 2 of 2 Posts
Not 100% sure but I'd try it. They're different probably because the traction control system uses the ABS module to do it's job, and the earlier Tibs didn't have TC. If the pumps look the same and the module would just bolt up I'd give it a try.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.