Hyundai Tiburon Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
22 Posts
Discussion Starter #1
I recently replaced headgaskets on my 04 tib GT 6speed 2.7l and might sound stupid but I would rather sound dumb then screw up all my work so when I took my camshafts out I had everything at tdc but when I went to put it all back together one of my cams do not line up with its mark i got the arrows in the black links and my mark does not line up with mark on valve cover like it did when I removed it will it hurt it if I put it in the way it is and then turn it by hand to the mark
 

·
Registered
Joined
·
1,319 Posts
turn the cam gears to the mark by hand with the timing belt off and with the cam bearing caps loose/removed.
check your TDC at crank, then install timing belt.

shouldn't hurt it that way.
 
1 - 3 of 3 Posts
Top