re: ==++ Optimummind's Garage Sale - Tein Springs, Polyurethane Bushings, Spoiler ==++
NIA 2007/2008 OEM Front Bumper Lip
=== SOLD ===
If you pick this up, you'll have to perform some reconditioning before getting it painted. Some light sanding to make things smooth again.
The mounting holes have been pre-drilled so all you need to do is buy the appropriate screws, fasteners, etc from Home Depot or a hardware store to mount them.
Painted & installed, it'll look like this:
===============================
OEM & Modified Tiburon Exhaust Components
From SE V6
From SE V6 but modified with Magnaflow Mufflers for deeper sound
=== SOLD ===
Top to Bottom: V6 resonator piping with resonate-delete -> OEM V6 resonator piping -> OEM i4 resonator piping
** Pricing: $50.00 each + shipping
(Remaining: OEM V6 SE mid-pipe with resonator-delete, OEM V6 mid-pipe, OEM i4 mid-pipe)
=== SOLD: (1) OEM V6 SE Exhaust with Magnaflow Mufflers
===============================
OEM Rear Swaybar Endlinks
Price: $15 shipped
==============================
OEM Tiburon Spoiler LED Light (plug has been cut off)
=== SOLD ===
Yes, the plug at the end has been cut off and is missing. If you have a spoiler with non-functional brake light, then you can attach your plug to this spoiler and plug it in to the car. You can solder or use butt connectors.
==============================
Energy Susension Polyurethane Regreasable Rear Sway Bushings & Mounts
Price: $30 shipped
These will fit a 22-mm rear sway bar (like the ones from Ark or Progressive). It comes with zerk grease fittings, which means you can regrease the bushings without first taking them off the car. Just pull back the rubber dust cap & shoot in more grease directly into the bushings. :smile2:
===============================
=== SOLD ===
If you pick this up, you'll have to perform some reconditioning before getting it painted. Some light sanding to make things smooth again.
The mounting holes have been pre-drilled so all you need to do is buy the appropriate screws, fasteners, etc from Home Depot or a hardware store to mount them.
Painted & installed, it'll look like this:
===============================
OEM & Modified Tiburon Exhaust Components
From SE V6
From SE V6 but modified with Magnaflow Mufflers for deeper sound
=== SOLD ===
Top to Bottom: V6 resonator piping with resonate-delete -> OEM V6 resonator piping -> OEM i4 resonator piping
** Pricing: $50.00 each + shipping
(Remaining: OEM V6 SE mid-pipe with resonator-delete, OEM V6 mid-pipe, OEM i4 mid-pipe)
=== SOLD: (1) OEM V6 SE Exhaust with Magnaflow Mufflers
===============================
OEM Rear Swaybar Endlinks
Price: $15 shipped
==============================
OEM Tiburon Spoiler LED Light (plug has been cut off)
=== SOLD ===
Yes, the plug at the end has been cut off and is missing. If you have a spoiler with non-functional brake light, then you can attach your plug to this spoiler and plug it in to the car. You can solder or use butt connectors.
==============================
Energy Susension Polyurethane Regreasable Rear Sway Bushings & Mounts
Price: $30 shipped
These will fit a 22-mm rear sway bar (like the ones from Ark or Progressive). It comes with zerk grease fittings, which means you can regrease the bushings without first taking them off the car. Just pull back the rubber dust cap & shoot in more grease directly into the bushings. :smile2:
===============================
13
send me a PM good sir
