Hyundai Tiburon Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
102 Posts
Also check out 79th production latest vid on YouTube. He just did a door replacement on an integra. It might give u some ideas on how to go about it.
He pulled the fender off first and then undone the bolts from the hinge to the door.
If u take the fender off, this will also give u chance to knock out that ding in it.
 

·
Registered
Joined
·
102 Posts
Thanks. Do you have a link for that video?

Why did they take out the window, regulator and the mirror off that door ?
Anyway u should be able to hit up a junkyard or eBay to get those.
Ive replaced a few regulators on older Elantra’s, I’d imagineTiburons are similar.
They just unbolt with about 3 10mm bolts and manoeuvre them in and out. The window bolts onto the regulator. Put the regulator in first then slide the window down onto the regulator from the top. The regulator must also have a motor. So you’ll need that to if u don’t have it.
 
1 - 2 of 2 Posts
Top