Hyundai Tiburon Forums banner
1 - 13 of 13 Posts

eddiewb

· Registered
Joined
·
231 Posts
Discussion starter · #1 ·
I am wondering if anyone knows the thread size to install FOG Lights. Don't want to wait for the dealership to order them. Rather run to the store. Flame if you must I just don't want to put them on with a wrong screw and then there goes my fog light falling out
 
Discussion starter · #5 ·
but the size depends on the hole in the bumper. The dealership will take a few days to order them. they are only 30 cents each but I want to put them on tonight. I am impatient.

EDIT: This is on the stock bumper
 
The dealership may be able to tell you what size you need, you can start there, if not, get a few of each different size fromthe hardware store, and keep the ons you don't use as spares, or return then if you want
 
2003-2008 Foglight Bulb Size is 9006.
Search around a bit and you'll find all the information you need.

Tip: When using the search feature and you type in multiple words, it will usually display any post that has any of the multiple words. Attaching a + to each word will bring up posts that contain all of the words you are looking for. Attaching a - does the opposite.
You can use this in eBay and many other search feature on other sites.
(There was one site that didn't work, and I'm not sure if it was this one. Doesn't hurt to give it a try though.)

Edit: Never mind.... it doesn't work on NT...
Too bad because it can help narrow things down a bit.
 
Discussion starter · #11 ·
2003-2008 Foglight Bulb Size is 9006.
Search around a bit and you'll find all the information you need.

Tip: When using the search feature and you type in multiple words, it will usually display any post that has any of the multiple words. Attaching a + to each word will bring up posts that contain all of the words you are looking for. Attaching a - does the opposite.
You can use this in eBay and many other search feature on other sites.
(There was one site that didn't work, and I'm not sure if it was this one. Doesn't hurt to give it a try though.)

Edit: Never mind.... it doesn't work on NT...
Too bad because it can help narrow things down a bit.
I did search found nothing for the screws. I have the bulbs and everything I need except for the screws to put the whole fog light onto the bumper
 
oops... i misread the finer points of your first point.
as for thread size, i don't know. Go ask the dealership.
or you can ask someone with a shop manual and ask him/her.
 
1 - 13 of 13 Posts