well, its finally time to part out, for real, I have NO choice now... i HAVE to trade, i MUST have a different car
I WILL NOT part out the turbo kit, i need to sell it as a whole, do NOT even bother asking me to sell u parts of the kit, if I do that, I will not be able to sell the rest of them..
prices are gonna be pretty firm, If you would like to make some kind of offer, and its not ridiculous, do so in a PM, but do not low ball me, or make some ridiculous offer....
ok here we go stuff im gonna be selling for sure
modified NGM turbo kit with FMIC and modified "crash bar" $3000 + shipping
all the hot pipes are ceramic coated, wrapped with black exaust wrap, and sprayd with black high heat ceramic coating for the exaust wrap... its setup for blow-thru maf, wich ran beautifully, it will likely come with the 2 catch cans, and "krank vents" aswell..
w/ alchy $3300 + shipping
w/ alchy and exhaust/cat $3600 + shipping
ngm alchy injection setup modified for trunk mounted tank
$400 + shipping
stage 3 upper red (ngm)
$250 + shipping
stage 3 lower black (ngm)
$250 + shipping
G-11 IM spacer + bolts, painted red
$100 + shipping
ported tb, powdercoated black
$120 + shipping sale pending ?
tb spacer
$50 + shipping
or $750 + shipping for the IM's spacers and TB as set
rails with aeromotive fuel sample valve + guage
$220 + shipping (valve is 85$ new) SOLD
greddy turbo timer w/ ignition harness
$ 90 + shipping
greddy profec B spec II
$200 + shipping
autometer guages: (dont knw where my head was a min ago, i got alot of stuff on my mind lol)
mechanical oil pressure (0-100 psi)
$50 + shipping
mechanical boost/vac (0-30psi/0-30in)
$50 + shipping
wideband a/f
$350 + shipping
full pillar replacment pod (3 guage)
$100 + shipping
guages + pod
$525 + shipping
bosch 190 LPH fuel pump
$100 + shipping SOLD
460cc injectors (6)
$400 + shipping
392cc injectors (6) + harnesses
$200 + shipping
safc2
$100 + shipping SOLD
Mafterburner
$100 + shipping SOLD
Nology cool wires (red/black)
$100 + shipping
adjustable cam gears (red)
$150 + shipping
Nick Bowers fullsize light weight crank pulley
$200 + shipping
custom fuel system..... I dont even know here to begin on this.. I have so much money tied up in this..
everything is braided stainless, anodized equal flow Y blocks, with matching anodized -6 a/n fittings, all lines have blue/red anodized -6 a/n fittings
and i have direct bolt up -6 a/n fittings for the fuel rails, that botl right to the tib fuel rails,
aeromotive rising rate boost sensing FPR
from the firewall to the rails, is all -6 braided stainless line
the lines alone were almost 400$, and i dont want to even think about how much i have in the fpr, Y blocks and fittings for those, and guages..
I dont even know what to ask for this... make an offer via PM and if its not ridiculously low i will consider it... I would like to get atleast 500 or so for it, at the minimum
ark/metalix Vertical door kit
$900 + shipping
right now thats all i can think of
I will be taking everything off the car this week or early next week.. so it will be ready to be purchased....
please dont message me and ask me if u can make payments on the turbo kit, or if u can buy something in 3 months,
again I am NOT selling this because im not happy with it, or because of any problems, I am selling this because Life has thrown me a curveball, and im being forced to trade my car, thats the responsible thing to do, thank you for your time
I WILL NOT part out the turbo kit, i need to sell it as a whole, do NOT even bother asking me to sell u parts of the kit, if I do that, I will not be able to sell the rest of them..
prices are gonna be pretty firm, If you would like to make some kind of offer, and its not ridiculous, do so in a PM, but do not low ball me, or make some ridiculous offer....
ok here we go stuff im gonna be selling for sure
modified NGM turbo kit with FMIC and modified "crash bar" $3000 + shipping
all the hot pipes are ceramic coated, wrapped with black exaust wrap, and sprayd with black high heat ceramic coating for the exaust wrap... its setup for blow-thru maf, wich ran beautifully, it will likely come with the 2 catch cans, and "krank vents" aswell..
w/ alchy $3300 + shipping
w/ alchy and exhaust/cat $3600 + shipping
ngm alchy injection setup modified for trunk mounted tank
$400 + shipping
stage 3 upper red (ngm)
$250 + shipping
stage 3 lower black (ngm)
$250 + shipping
G-11 IM spacer + bolts, painted red
$100 + shipping
ported tb, powdercoated black
$120 + shipping sale pending ?
tb spacer
$50 + shipping
or $750 + shipping for the IM's spacers and TB as set
rails with aeromotive fuel sample valve + guage
$220 + shipping (valve is 85$ new) SOLD
greddy turbo timer w/ ignition harness
$ 90 + shipping
greddy profec B spec II
$200 + shipping
autometer guages: (dont knw where my head was a min ago, i got alot of stuff on my mind lol)
mechanical oil pressure (0-100 psi)
$50 + shipping
mechanical boost/vac (0-30psi/0-30in)
$50 + shipping
wideband a/f
$350 + shipping
full pillar replacment pod (3 guage)
$100 + shipping
guages + pod
$525 + shipping
bosch 190 LPH fuel pump
$100 + shipping SOLD
460cc injectors (6)
$400 + shipping
392cc injectors (6) + harnesses
$200 + shipping
safc2
$100 + shipping SOLD
Mafterburner
$100 + shipping SOLD
Nology cool wires (red/black)
$100 + shipping
adjustable cam gears (red)
$150 + shipping
Nick Bowers fullsize light weight crank pulley
$200 + shipping
custom fuel system..... I dont even know here to begin on this.. I have so much money tied up in this..
everything is braided stainless, anodized equal flow Y blocks, with matching anodized -6 a/n fittings, all lines have blue/red anodized -6 a/n fittings
and i have direct bolt up -6 a/n fittings for the fuel rails, that botl right to the tib fuel rails,
aeromotive rising rate boost sensing FPR
from the firewall to the rails, is all -6 braided stainless line
the lines alone were almost 400$, and i dont want to even think about how much i have in the fpr, Y blocks and fittings for those, and guages..
I dont even know what to ask for this... make an offer via PM and if its not ridiculously low i will consider it... I would like to get atleast 500 or so for it, at the minimum
ark/metalix Vertical door kit
$900 + shipping
right now thats all i can think of
I will be taking everything off the car this week or early next week.. so it will be ready to be purchased....
please dont message me and ask me if u can make payments on the turbo kit, or if u can buy something in 3 months,
again I am NOT selling this because im not happy with it, or because of any problems, I am selling this because Life has thrown me a curveball, and im being forced to trade my car, thats the responsible thing to do, thank you for your time
